Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in San Bruno, CA | Gold Star Contractors
Need Unilock service in Millbrae or paver work done in San Bruno? We’re Gold Star Contractors, and we install, repair, and rebuild Unilock paver driveways, patios, and walkways across 94066. What makes our Unilock work different here is simple: most San Bruno jobs are tear-outs on small, sloped lots in the fog belt, not flat new-build installs. We’re an independent Unilock installer, not a manufacturer affiliate, and we plan every base and edge detail around what San Bruno’s marine moisture and post-war soils actually do to pavers. Call us at (833) 382-8544 to have us look at your driveway or patio.
Why San Bruno Residents Choose Us for Unilock Service
Unilock systems fail in predictable ways here, and we’ve seen most of them. Fog-belt dampness, tight side yards, sloped driveways, old concrete tear-outs with surprises underneath. That’s the everyday reality of hardscape work in San Bruno, and it’s why we don’t treat a paver job as a flat, clean-slate install.
Noel Carranza runs our operation, and he came up doing concrete and finish work across Orange County before building Gold Star Contractors into a full-scope general contracting team. That background matters when we open up a 1950s San Bruno driveway and find thin-poured concrete, unpermitted fill, or an old patio slab nobody knew about. We know how to re-base properly, set Unilock’s own edge restraint, and pitch the field so fog-season runoff drains away from the foundation. One call, done right – that’s the only way Noel knows how to run a job.
And because we’re a San Bruno General Contractor with partnerships across 50+ manufacturer brands, we can coordinate the paver work with your fencing, drainage, or a retaining wall without stopping your project to find another trade.
Styles & brands we work with
Common Unilock Construction Problems We Solve in San Bruno
- Fog-belt joint sand washout on west-side hillside driveways. Cool, damp air keeps bedding sand from locking, so joint sand migrates and paver units loosen within a few wet seasons. We see it most on west-facing slopes in San Bruno where the marine layer sits longest. The fix is re-sanding with Unilock’s jointing products and, where the pitch is steep, upgrading the base and restraint to stop the washout cycle, not just patch it.
- Edge restraint failure where driveways end at a slope or retaining edge. Many San Bruno driveways terminate at a low wall or run aggressively toward the house. Inadequate edge restraint lets the whole paver field creep downhill where runoff concentrates. We cut in proper edge restraint and secure it so the field stays put.
- Base failure over mixed fill, old concrete, and buried surprises. Tight, sloped in-fill parcels in San Bruno hide all kinds of things: unpermitted slabs, fill pockets, old utility stubs. Skip the over-excavation and the pavers dish and settle within a season or two. We over-excavate to compacted aggregate before anything goes back.
- Moss, algae, and efflorescence on shaded patios. Persistent marine moisture and low winter sun keep north-facing patios and walkways wet for months. If the slope drainage is wrong, surface staining and joint growth return fast. We regrade the base pitch first, then lay the pavers; sealing alone won’t fix a drainage problem.
- Driveway replacement where the old concrete has outlived its base. San Bruno’s 1940s to 60s driveways were often poured thin, with no rebar, over unimproved soil. When the concrete is cracked and lifting, the base underneath usually failed too. We remove it to full depth and rebuild rather than overlay new material on a dying foundation.
Unilock Service in San Bruno: What Local Conditions Mean for Your Equipment
San Bruno is built out inside 94066. Squeezed between SFO, the San Andreas fault zone, and already-subdivided lots, there’s almost no new development here. Nearly all construction is remodel, addition, and rebuild work. For Unilock paver jobs, that means we’re not laying pavers on a fresh graded lot; we’re tearing out an existing 1940s to 1960s driveway or patio apron on a small, often sloped parcel, with a fence on one side and a neighbor’s wall on the other.
The Crestmoor neighborhood makes this even more specific. After the 2010 PG&E pipeline explosion, a swath of homes there was rebuilt to modern standards, creating a pocket of newer construction among original 1950s ranches. So a contractor bidding a paver job near Crestmoor knows something real: the house next door may sit on original post-war grade, while the house you’re working on sits on a decade-old rebuilt foundation with fresh utility stubs. The base conditions change from one side of the property line to the next. You can’t spec a uniform base for that; you have to open it up and see what’s under the old surface. We plan every San Bruno job around that variability, and we’ll tell a homeowner upfront whether their existing paver field can be reset and re-sanded or whether the base has to be rebuilt.
Unilock Models & Products We Service in San Bruno
We regularly install and service Unilock Brussels Block, the Brussels Dimensional Series, Beacon Hill, and Eco-Optiloc permeable pavers across San Bruno and provide Unilock repair in Pacifica. Each line behaves a little differently under fog-belt conditions. Brussels Block is a proven choice for residential driveways and holds up when the base is right. Eco-Optiloc is our go-to when a San Bruno homeowner wants a permeable walkway or patio that reduces runoff on a sloped lot.
We use Unilock’s own restraint, edge, and joint-sand products, not aftermarket generics that don’t match the paver dimensions or the joint profile. And we stock common jointing and edge materials locally so we don’t hold up a San Bruno repair waiting on a shipment. If a paver field can be reset and re-sanded with sound units re-used, we’ll say so. If the base is done, we’ll tell you that too – laying new pavers over a failed base is not something we’ll do.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in San Bruno
What you’ll pay for Unilock paver work in San Bruno depends mostly on what we find when we open up the old surface, how much aggregate base has to go back in, and whether the site can be accessed easily or requires hand-carrying materials up a sloped side yard. These are the ranges we work within:
| Unilock Paver Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement (full tear-out and rebuild) | $5,000 – $14,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Sealing | $250 – $700 |
A free estimate from us means we come out, look at the existing surface, check the drainage and the slope, and give you a written line-item price. No vague ballpark, no change order after we start digging. Call (833) 382-8544 and we’ll set it up.
Serving San Bruno, CA — Our Local Coverage Area
We’re based in the San Bruno area and know this community well, and we also offer Unilock service in Brisbane. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in San Bruno
Because the cool, damp air here keeps bedding sand from locking, and winter rain then flushes joint sand down-slope before it ever has a chance to set. West-facing driveways in San Bruno are the worst. The fix is to re-sand with Unilock’s jointing products and verify the base and edge restraint are doing their job. Call (833) 382-8544 and we’ll check it.
Technically yes, but in San Bruno we rarely recommend it. Most existing concrete here is 1950s thin-pour with cracks that telegraph straight through an overlay, and adding paver height on a sloped lot can mess with drainage and thresholds. The better, longer-lasting approach is a full tear-out to proper base. We’ll tell you which way to go after seeing the slab.
In most cases, yes, especially if the driveway connects to the public right-of-way or if the slope triggers drainage review. As a licensed general contractor, we pull the permits for our San Bruno clients and handle the inspections. Call (833) 382-8544 and we’ll confirm what your specific project requires in 94066.
For most sloped lots here, yes. Pavers move with minor ground shift without cracking the way a monolithic slab does, and the segmental joints let water percolate instead of channeling downhill and pooling at the foundation. We’ve seen plenty of San Bruno concrete driveways crack at the top of the slope within a few years. Properly based Unilock pavers handle that movement far better.
That’s moss, algae, and efflorescence. The fog belt keeps north-facing patios wet for months, and when the patio pitch doesn’t shed water, the surface grows green and the salts leach up as white staining. We fix this by correcting the base slope so water leaves the surface, then re-sanding. Call (833) 382-8544 to schedule a look.
Service Areas Near San Bruno
We provide Unilock paver service across 94066 and into the surrounding Peninsula communities, including South San Francisco, Montara, Pacifica, Millbrae, and Burlingame. If you’re nearby and looking for Unilock work, we’ll bring the same San Bruno base and drainage planning to your project. See our Unilock service in South San Francisco or Unilock service in Montara pages for details, and visit our San Bruno service area page to confirm coverage.
For all Unilock product and installation questions, our Unilock sales & service page outlines the full scope of what we handle.
Book Your Unilock Service in San Bruno Today
If your Unilock driveway, patio, or walkway is settled, washing out, or just looking tired after too many fog seasons, call us at (833) 382-8544. We’ll schedule a free estimate, open up the surface if needed, and give you a straight answer on what has to be rebuilt and what can be saved.
Written by Noel Carranza, Owner & General Contractor at Gold Star Contractors, providing Unilock paver installation and repair across San Bruno, CA.