Unilock Construction in Redwood City, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Unilock Construction in Redwood City, CA | Gold Star Contractors

We handle Redwood City Home Remodeling with Unilock paver and retaining wall work across the city, from flat-lot driveways in 94063 to hillside terraces in 94062. The one thing that separates our Unilock work here is that we plan every job around Redwood City’s split geology: bay mud and fill on the flats, Franciscan melange in the hills. We’re an independent Unilock service provider, not manufacturer-authorized, and we quote repairs and installs on what your site actually needs. Call (833) 382-8544 for a free estimate.

Construction worker using a miter saw on a home renovation project in Redwood City, CA

Call (833) 382-8544

Why Redwood City Residents Choose Us for Unilock Service

We’ve been laying Unilock pavers and walls across the Peninsula long enough to know exactly how these systems behave in Redwood City’s two geologic worlds. A Brussels Block driveway in the 94063 flats sits on completely different ground than a U-Cara terrace wall in Emerald Hills, and we plan accordingly. Noel Carranza, our owner and Redwood City General Contractor, studied construction technology at Fullerton College and spent years on job sites doing everything from concrete work to finish carpentry before building this operation. That hands-on background matters when a paver base fails and the fix isn’t obvious from the surface. We source genuine Unilock units and system components like geogrid, edge restraint, and polymeric joint sand for replacements and new work, and we use quality aftermarket base and drainage materials where they meet spec. One contractor. Every system. No handoff gaps.

We also coordinate the full scope, whether your Unilock patio ties into a retaining wall, a driveway, or a drainage system that feeds your home’s exterior. Unilock sales & service is a core part of what we do, but we’re a full-scope general contractor, so the same team that pulls your old paver base can also handle the site grading, drainage, and any hardscape-adjacent work that pops up. You don’t juggle five vendors.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common Unilock Construction Problems We Solve in Redwood City

  • Base failure on bay-mud and fill lots in 94063/94065. Unilock units rock and settle because the subgrade was compacted to flat-lot spec, not the deeper, pier-ready base liquefaction-prone ground needs. We see this constantly on the flats near Redwood Creek and along the old salt-evaporation ground. A paver driveway that shifts an inch after one wet winter usually means the base was never engineered for that soil.
  • Hillside creep and wall rotation in 94062. U-Cara terraces built on Franciscan melange without engineered geogrid and proper drainage rotate and bulge after a wet season. The clay fines clog drains, water builds up behind the wall, and hydrostatic pressure does the rest. We pull the wall, find what’s missing, and rebuild it right.
  • Efflorescence and joint-sand loss on Brussels Block and Beacon Hill. Redwood City’s wet-dry cycle wicks salts up through the pavers and washes polymeric sand out of the joints, especially on north-facing patios that stay damp longer. That white haze isn’t a stain, it’s soluble salts migrating through the unit, and the fix involves drainage and joint stabilization, not just re-sanding.
  • Expansive-clay heave cracking pavers and lifting edges. The seasonal swell-shrink in the flats cracks units and opens joints wherever edge restraint is missing or too shallow. We see this on post-war rancher lots where the original patio was laid directly on clay with no base management.
  • Tear-out complications on tight infill lots. Most Redwood City Unilock work replaces an existing driveway or patio, not a greenfield install. Narrow side yards, limited staging, and matching the existing grade to the house sill all shape how the job runs. Disposal and access are part of the bid, not an afterthought.

Unilock Service in Redwood City: What Local Conditions Mean for Your Equipment

Here’s what most paver contractors won’t tell you upfront: the same Unilock system needs a fundamentally different base, drainage, and repair plan depending on which side of Highway 101 you’re on. In the 94063 flats near Redwood Creek and the Bay, we’re building on bay mud and fill where the old salt-evaporation and slough ground means deeper base prep and liquefaction review. A paver driveway there isn’t just a paver driveway, it’s a structure sitting on soil that moves when saturated. Over in Emerald Hills and Edgewood Park in 94062, we’re on steep, slide-prone Franciscan melange where older un-engineered retaining walls predate modern slope ordinances. A retaining wall that’s held for twenty years can start rotating after one properly wet winter because the soil behind it finally reached saturation. We’ve pulled 1990s U-Cara walls that had no geogrid and a French drain clogged with clay fines, and the fix was never cosmetic. Understanding which geologic world your property sits in changes the entire plan, and that’s the conversation we have before we ever touch a paver.

In Emerald Hills specifically, a homeowner’s 1990s U-Cara terrace wall had rotated about two inches, and the Beacon Hill flagstone patio above it was heaving at the joints. We pulled the wall, found no geogrid and a French drain clogged with Franciscan clay fines, re-engineered the base with drainage and grid, and re-laid the flagstone on a compacted, free-draining base. The wall has stayed plumb through two wet seasons since.

Unilock Models & Products We Service in Redwood City

We service and install the full Unilock line, including Woodside Unilock service nearby, but the units we work with most in Redwood City are Brussels Block pavers for classic tumbled driveway and walkway work, Beacon Hill Flagstone for irregular patios and paths, U-Cara for segmental retaining walls, and Onyx & Coal or Umbriano for smooth-face driveway and patio units. For replacements, we source genuine Unilock units so color and dimension match the existing field. For base, drainage, edge restraint, and geogrid, we use aftermarket materials that meet or exceed spec. We stock common edge restraint, polymeric sand, and base materials locally so Redwood City turnaround isn’t waiting on a distributor run from the other side of the Bay.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Unilock Service Pricing in Redwood City

Here’s what Unilock paver and wall work typically runs in the Redwood City market:

Service Price Range
Paver Patio Installation $3,500 – $11,000
Paver Driveway Installation $7,000 – $18,000
Driveway Replacement $5,000 – $14,000

What drives the cost here more than anything is site prep. The flats of 94063 often need deeper base removal and compaction because of the bay mud underneath. A hillside terrace in 94062 needs geogrid, drainage, and possibly a geotechnical report before we lay the first block. A free estimate from us includes an on-site look at your subgrade, existing drainage, and access, so the number we quote is the number the work costs. Call (833) 382-8544 to schedule one.

Construction worker using a miter saw on a home renovation project in Redwood City, CA

Serving Redwood City, CA — Our Local Coverage Area

We’re based in the Redwood City area and know this community well, including Unilock in West Menlo Park just to the north. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Unilock Construction in Redwood City

Service Areas Near Redwood City

Beyond Redwood City, we serve Redwood City service area coverage that extends to nearby communities including San Carlos, Unilock service in San Carlos, and Unilock service in Emerald Lake Hills, Redwood City’s hillside neighbor to the south. We also take Unilock calls from surrounding Peninsula and Bay-side communities within a reasonable drive.

Book Your Unilock Service in Redwood City Today

If your Unilock pavers are rocking, your joints are washing out, or your retaining wall is leaning, call (833) 382-8544. We’ll send someone out to look at your subgrade, drainage, and access, and give you a straight answer on repair versus replace. One call, done right – that’s the only way we know how to run a job.

Written by Noel Carranza, Owner at Gold Star Contractors, serving Redwood City and the surrounding Peninsula.

Need Construction help in Redwood City? Licensed & insured · Written quotes before work starts response · free estimates
Call (833) 382-8544
Areas We Serve

Request a Free Estimate in Redwood City

Tell us what you need — Gold Star Contractors responds fast. No obligation.

When you send us your details, you agree to the terms of our Privacy Policy and consent to receive communications by call, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Text Now
Call Now - 24/7 Dispatch