Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Adelanto, CA | Gold Star Contractors
We provide independent Unilock installation and repair across Adelanto, from paver driveways off Air Expressway to patios on rural lots near the 395. The thing that makes our Unilock work here different is simple: we build for wind scour and expansive soil, the two forces that destroy hardscape in this part of the High Desert faster than anywhere else. If you’re planning a paver project or dealing with failing ones, call (833) 382-8544 for a free estimate.
Gold Star Contractors is not affiliated with, authorized by, or sponsored by Unilock. We’re an independent construction crew that has set Unilock base, edge restraint, and pavers across the Victor Valley for years, and we know how these units behave long after the truck pulls away. For more on our broader Unilock work, see Unilock sales & service.
Why Adelanto Residents Choose Us for Unilock Service
Most hardscape crews in the High Desert treat Adelanto like Victorville or Hesperia. It’s not the same. The lots here are flatter, sandier, and more exposed to wind than anything west of the 395, and the housing stock is a mix of older single-family homes, manufactured homes, and rural parcels that were often built onto without permits. That means the base under your pavers, the drainage around them, and the edge restraint holding them are doing a different job than they would two exits down.
Noel Carranza, our owner, studied construction technology at Fullerton College and spent years doing concrete and finish carpentry across Orange County before building this operation. He’s particular about base prep because he’s seen what desert soil movement does to flatwork that was poured without thinking about drainage. When we set Unilock in Adelanto, we over-excavate, add geotextile where the sand is loose, and pitch every run to daylight. That’s not standard on a bid sheet. It’s what actually holds up here.
We also keep Unilock’s matching edge restraint, joint sand, and base materials in our workflow, not generic substitutes. A color or profile mismatch on a Brussels Block driveway is visible from the street. A weak restraint fails in the first wind season. We’d rather do it once.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Adelanto
- Joint sand loss from wind scour. Adelanto’s flat, sandy lots get hit with near-constant wind that polishes and scours joint sand out of paver joints. Units start rocking, edge lines wander, and the surface loses its lock. We re-sand, re-level, and in many cases upgrade the edge restraint to hold the system against desert wind, not just foot traffic.
- Heaving and settlement from expansive soils. The desert clay under Adelanto swells when it’s wet and shrinks when it’s dry. Pavers that were flat at install start showing lippage and ponding within a season or two. We rebuild base courses with proper compaction and drainage so the surface stays where we left it.
- Permeable systems clogging with wind-blown fines. Eco-Optiloc and other permeable Unilock lines stop draining when Adelanto’s blowing sand and dust fill the joints and the filter layer. We clean the system, re-pitch the surface, and set a maintenance schedule that accounts for this city’s dust load.
- Unpermitted flatwork shifting under new pavers. Many older rural parcels in Adelanto have concrete slabs and footings that were poured without permits, without compaction, and without drainage. When we set new Unilock over or next to them, those old cracks and shifts open joints fast. We flag it, fix the base, and only then lay units.
- Edging and perimeter failure on exposed lots. Without a heavier edge restraint or proper anchoring, Adelanto’s wind gets under paver edges and lifts them. We spec desert-rated restraint on every Unilock project here, and it’s one of the first things we check on a repair call.
Unilock Service in Adelanto: What Local Conditions Mean for Your Equipment
Adelanto’s flat, sandy lots are exposed to wind-driven sand and dust year-round, and it’s far more aggressive here than in neighboring Victorville, Spring Valley Lake, or Hesperia, where grade changes and tract build-out break the wind. That single fact changes how Unilock systems should be specified in this city. Joints have to be filled and maintained with sand that resists scour. Base courses need geotextile separation where the native soil is loose. Edge restraint needs to be anchored for uplift, not just containment. Drainage has to pitch to daylight, because flash-flood monsoon storms and flat desert lots mean water has nowhere to go unless we give it a path. Off Air Expressway, we tore out a failing concrete apron and set a Brussels Block driveway for a homeowner whose slab had cracked from expansive-soil movement and poor drainage. Wind-blown sand had already worked into the old cracks, so we over-excavated the base, added geotextile, and pitched the run before laying units. That’s the difference between a paver job that lasts and one that gets redone in three years. Everything we build in Adelanto starts with this: the sand, the wind, and the water get a vote.
Unilock Models & Products We Service in Adelanto
We install, repair, and re-level the Unilock lines most common on High Desert properties: Brussels Block for driveways and patios where homeowners want that tumbled, older-stone look; Beacon Hill for a cleaner, more contemporary edge; Hollandstone for tight patterns and smaller-scaled work; and Eco-Optiloc where a permeable system is requested. When existing pavers are sound but joints have blown out or edges have shifted, we re-level and re-sand rather than tearing out the whole field. When the base or drainage is the real problem, we say so and rebuild it. We’d rather tell you the truth than sell you a surface that will fail again. Our Adelanto work is part of the same service area we cover across the Victor Valley; if you’re nearby, see Adelanto service area for more.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Adelanto
Here’s what Unilock-related hardscape work typically runs in Adelanto. These ranges reflect the cost of proper base prep, geotextile where needed, edge restraint, drainage, and installation:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
What drives cost in Adelanto is base condition. If the underlying slab or soil is shot, you pay for excavation and compaction before a single paver goes down. If the existing base is sound, it’s mostly leveling, sanding, and edge work. Every estimate we give is free and line-itemed, so you see exactly where the money goes. Call (833) 382-8544 for an exact number on your project.
Serving Adelanto, CA — Our Local Coverage Area
We’re based in the Adelanto area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Adelanto
Because Adelanto’s wind is relentless. On flat, sandy lots with no grade break, wind-blown sand scours joint material out faster than anywhere else in the Mountain View Acres area or Victor Valley. The fix is a heavier-spec joint sand, well-anchored edge restraint, and a maintenance schedule built for desert wind, not foot traffic. Call (833) 382-8544 and we’ll tell you exactly what your pavers need.
Sometimes, but only if the concrete is structurally sound, flat, and drains correctly. Many Adelanto slabs, especially on older rural parcels, have cracks from expansive-soil movement or were poured without permits or compaction. If the base is questionable, we’ll say so and recommend either repair or tear-out before laying pavers. Call (833) 382-8544 for a free inspection and honest answer.
Yes, if the base is built for it. Expansive clay swells when wet and shrinks when dry, and that movement heaves pavers unless the base is over-excavated, compacted properly, and given a geotextile layer where needed. We build every Oak Hills and Adelanto patio that way. If your existing patio already has lippage or ponding, we can re-level and re-sand it. Call (833) 382-8544 for an estimate.
It does. Summer heat compresses the window for base compaction and joint-sand work, because the sand dries and shifts faster when it’s 105 degrees. We schedule Adelanto work in the early morning and pace the crew accordingly. It’s not a shortcut, it’s how you get a paver system that stays put. Call (833) 382-8544 to check current scheduling.
Depends on the scope. Driveways that tie into a public right-of-way or change drainage patterns often require a permit, as do larger patio additions. Many Adelanto properties have unpermitted prior work, which can complicate things. We handle permitting on our jobs and will tell you upfront what your project triggers. Call (833) 382-8544 to find out.
Service Areas Near Adelanto
We serve Adelanto and the surrounding Victor Valley communities, including Victorville, Hesperia, Apple Valley, and Phelan. If you’re further out, see Unilock service in Anza or Unilock service in Morongo Valley.
Book Your Unilock Service in Adelanto Today
If your pavers are shifting, losing sand, or if you’re planning a new driveway or patio, call (833) 382-8544 to schedule a free estimate. We’ll walk the property, check the base, and give you a line-itemed quote built for Adelanto’s wind and soil. One call, done right – that’s the only way we know how to run a job.
Written by Noel Carranza, Owner at Gold Star Contractors, serving Adelanto and the Victor Valley.