Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Felton, CA | Gold Star Contractors
We provide independent Tremron paver and hardscape installation, repair, and replacement across Felton and Tremron service in Ben Lomond. The thing that sets our Tremron work apart here is straightforward: we build for redwood roots, steep slopes, and WUI fire code. That’s what Tremron construction in this valley actually demands. If you’re dealing with a heaved driveway off Hihn Street or a moss-covered patio under old-growth canopy, call (833) 382-8544 and we’ll take a look.
Why Felton Residents Choose Us for Tremron Service
Gold Star Contractors has been laying Tremron pavers on the steep, root-laced slopes of the San Lorenzo Valley for years, including Tremron service in Lompico. We know how the product behaves in Felton’s wet winters and redwood-shaded lots. Our crew handles Tremron’s full paver and hardscape line without any manufacturer affiliation, which means we specify the right product for your site, not what a dealer is pushing.
Noel Carranza runs our operation, and he grew up watching older tract homes get renovated block by block in Anaheim’s Platinum Triangle. That early exposure taught him how buildings actually go together, and it’s the same approach he brings to every Felton job: understand the site before you lay a single paver. We’re a licensed general contractor, insured and bonded, and we coordinate the entire project through one accountable team. One call, done right, that’s the only way we know how to run a job.
Styles & brands we work with
Common Tremron Construction Problems We Solve in Felton
Felton’s combination of heavy winter rainfall, redwood canopy shade, and clay-heavy slopes creates specific failure patterns in Tremron installations. Here’s what we see and fix most often:
- Efflorescence and moss growth on north-facing patios. When redwood canopy blocks sun and traps moisture, Tremron pavers develop that white chalky film and green moss layer faster than anywhere else in the county. We clean, treat, and seal with products matched to Tremron’s concrete composition so the color holds through the next wet season.
- Settlement and heaving on clay slopes. Felton’s clay-heavy soil saturates in winter and shrinks in summer. When base prep doesn’t account for seasonal saturation and root voids, Tremron driveways start to rock and dip. We’ve pulled up pavers that shifted three inches in a single rainy season because the original install skipped proper aggregate compaction.
- Edge restraint failure from winter runoff. Steep Felton lots shed water fast. When runoff scours the sand joint and undermines the perimeter, the edge restraint fails first, then the whole field starts drifting. We replace edge restraints with Tremron’s OEM-compatible products and re-grade so water moves around the installation instead of through it.
- Tannin staining from redwood debris. Redwood needles and branches drop a tannin-rich stain that penetrates Tremron paver surfaces. We’ve seen patios under big redwoods turn almost black within two years. Our cleaning process lifts tannin without eroding the paver’s surface texture.
- Wildfire ash damage on CZU burn-scar properties. After the 2020 CZU Lightning Complex, wind-driven ash and ember residue settled into paver surfaces across Felton. Some of it etched the finish permanently. We assess whether a deep clean restores the surface or whether selective paver replacement makes more sense.
Tremron Service in Felton: What Local Conditions Mean for Your Equipment
Here’s the Felton-specific reality most contractors from over the hill miss: WUI Chapter 7A building standards apply to hardscape within five feet of any structure. Felton sits inside a wildland-urban interface zone, and the code requires ignition-resistant materials in that five-foot defensible space perimeter. Tremron’s concrete pavers meet that spec where wood decks and mulch don’t. On CZU rebuilds, we routinely swap out combustible ground cover for Tremron systems, because it satisfies the fire marshal and it lasts decades longer than decking that will rot in the shade anyway.
Redwood roots and old-growth stumps under Felton lots add another layer. Footings and paver bases routinely hit buried wood that has to be removed before concrete pours. Skip that step and your Tremron field will heave within two winters. We excavate to solid ground every single time, because in Felton there’s no shortcut around what’s under the soil.
On a rebuild off Hihn Street in Felton, we tore out a heaved Tremron Olde Towne driveway that had been laid over redwood roots with no base removal. Every winter the pavers rocked. We excavated the buried stump and root mat, rebuilt the base with compacted aggregate, and reinstalled the same Tremron Olde Towne profile with OEM edge restraint. The homeowner now has a stable, WUI-compliant driveway that sheds water instead of pooling it.
Tremron Models & Products We Service in Felton
We install and repair Tremron Olde Towne pavers, the Plaza Series, Stonegate retaining wall blocks, and Brockton pavers. The Olde Towne profile is the one we see most often on Felton driveways, and we stock OEM color-matched sand and edge restraints for it so repairs don’t require a trip over Highway 17. We won’t substitute generic polymeric sand on slopes, it fails faster in Felton’s wet cycle and you’ll be calling us back in eighteen months. If a paver field is more than 20% unsettled or heaved, we recommend full replacement with a properly engineered base rather than spot-patching. Patching a failed base just moves the problem around.
For all Tremron work, we treat Tremron sales & service as a product line we know deeply, not a brand name we happen to carry. That’s the difference between a contractor who installs pavers and one who understands how a specific paver behaves under redwood canopy in a WUI zone.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Felton
Pricing for Tremron work in Felton depends on three things: slope, root conditions, and whether we’re replacing a failed base or installing fresh. Here’s what you can expect:
| Service | Typical Range in Felton |
|---|---|
| Paver Driveway Installation (Tremron) | $7,000 – $18,000 |
| Paver Patio Installation (Tremron) | $3,500 – $11,000 |
| Driveway Replacement (including base prep) | $5,000 – $14,000 |
The wide range reflects what’s under your lot. A flat driveway with clean soil falls toward the low end. A steep driveway with buried redwood stumps and a failed base falls toward the high end. We give written line-item quotes before work starts, and the number doesn’t change once we start digging unless we uncover something structural that neither of us could have known about. Call (833) 382-8544 and we’ll schedule a free estimate.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well, and we also provide Tremron in Scotts Valley. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Felton
Yes, Tremron pavers work on slopes up to about 8% grade with a properly engineered base and edge restraint system. We’ve installed them on some of the steepest driveways off Hihn Street and up near the burn scar, as well as offering Tremron service in Mount Hermon. The key in Felton is base depth and compaction, on a slope with clay-heavy soil, you need more aggregate than flat-ground installs require. Call (833) 382-8544 for an evaluation of your specific grade.
Yes. Tremron’s concrete pavers meet Chapter 7A ignition-resistant material requirements for the five-foot defensible space zone around structures. They’re non-combustible, unlike wood decking or mulch. On CZU rebuilds in Felton, we’ve specified Tremron for walkways and patios specifically because the fire marshal signs off on it without hesitation. If you’re rebuilding in the 95018, this is one less code hurdle to worry about.
We start with a deep clean using a paver-safe cleaning solution that lifts tannin staining and efflorescence without etching the surface. Then we address the moisture source, which in Felton usually means re-grading the area so water moves away from the paver field. Finally we seal with a breathable sealer that slows moss regrowth. Under heavy redwood canopy, you’ll still get some seasonal moss, but the sealer makes annual maintenance a lot easier.
Most Tremron driveway replacements in Felton run between $7,000 and $18,000 depending on slope, square footage, and what we find when we excavate. The big variable here is root and stump removal, which can add significant cost if the original install was laid over buried wood. We always give a free written estimate before work starts. Call (833) 382-8544 and we’ll come out and measure.
Yes, in most cases. We stock OEM color-matched sand and edge restraints for the Tremron product lines common in Felton, and we can match Olde Towne, Plaza Series, Stonegate, and Brockton pavers. Color matching gets harder the older your installation is, because UV and tannin exposure age the surface. But we’ll pull a sample from your existing field and get as close as the manufacturing tolerances allow. Some variation is normal; most homeowners find it blends fine within a full field.
Service Areas Near Felton
Gold Star Contractors serves Felton and the surrounding San Lorenzo Valley communities. We take Tremron work in Felton service area covering the 95018 ZIP, and we also handle jobs in nearby Santa Cruz County communities. For clients on the other side of the hill, we offer Tremron service in Lexington Hills and Tremron service in Seven Trees. If you’re within 45 minutes of Felton, we’ll come take a look.
Book Your Tremron Service in Felton Today
If your Tremron driveway is heaving, your patio is growing moss faster than you can scrub it, or you’re rebuilding after CZU and need WUI-compliant hardscape, we’re ready. Call (833) 382-8544 to schedule your free estimate. We’ll walk the site with you, talk about what’s under the soil, and give you a written number that holds.
Written by Noel Carranza, Owner at Gold Star Contractors, serving Felton and the San Lorenzo Valley.