Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Redwood City, CA | Gold Star Contractors
Gold Star Contractors provides independent Home Remodeling – Redwood City with Mr-Glass construction service across the area, from Emerald Hills to the flats near Redwood Creek. We install and repair Mr-Glass frameless shower enclosures, semi-frameless sliding doors, tempered glass railings, and aluminum framed window systems. The one thing that makes our Mr-Glass work here different: Redwood City sits on two very different kinds of ground, and stock glass panels behave differently on each. Call (833) 382-8544 for a free estimate.
Why Redwood City Residents Choose Us for Mr-Glass Service
Most Mr-Glass work in Redwood City is not new construction. It’s a retrofit into a 1940s rancher in the 94061 flats or a 1970s hillside home in 94062 where the original bath alcove was framed decades before modern glass-blocking standards. We’ve opened enough of those walls to know what’s behind them, or more often, what isn’t. Noel Carranza, our owner and lead contractor, started out doing concrete and finish carpentry across Southern California before building this operation. He will tell you the same thing he tells every Redwood City homeowner: a shower enclosure is only as good as the framing behind it. We work with the Mr-Glass line, but we are not authorized by the manufacturer. That independence is useful. If a stock Mr-Glass unit fits, we say so. If the opening needs to be reframed and squared first, we say that too, and we do the work. See our Mr-Glass sales & service page for the full scope.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Redwood City
- Panels that bind or gap a season after install. On bay-mud and expansive-clay lots in 94063 and 94065, slabs and shower curbs move with the wet-dry cycle. Even a correctly templated Mr-Glass panel can bind or leave a gap a year later as the floor shifts. We re-shim, re-square, and reset hinges to bring the glass back to true.
- Corroded pivot and hinge hardware near the Bay. Marine-layer humidity along the Redwood Creek corridor and lower-floor bathrooms with limited ventilation accelerate corrosion and seal failure. We replace pivots, hinges, sweeps, and seals with OEM Mr-Glass hardware, which holds up better than aftermarket equivalents.
- Out-of-plumb openings in hillside homes. In Emerald Hills and Edgewood-area homes, un-engineered decks and retaining walls allow walls to creep over time. That throws shower openings out of plumb so stock Mr-Glass panels will not seal. We square the opening or adjust the curb before the glass is ever templated.
- Etched glass and scaled tracks from hard water and summer dust. Older interior plumbing and harder local water can leave hairline etching and track scaling on Mr-Glass sliding doors. Dry summer dust then scratches the grit into the tracks. We clean, reseal, and replace tracks or glass when the temper is compromised.
- Loose or sagging aftermarket replacement parts. A previous handyman fix with a cheap aftermarket pivot will fit loosely and sag, which eventually cracks tempered panels. We pull those out and install OEM Mr-Glass hardware rated for the panel weight.
Mr-Glass Service in Redwood City: What Local Conditions Mean for Your Equipment
Redwood City is a built-out, high-value infill market, and that changes how General Contractor in Redwood City teams install Mr-Glass enclosures. In most of the city, the work is a retrofit into a mid-century rancher or bungalow on a tight lot. The original bath alcove was framed long before anyone cared about blocking for heavy glass panels, and the opening is rarely plumb or square. That is not a problem you fix by ordering a stock kit and hoping. We almost always open the wall first, add backing, and square the curb before a panel is templated. Down in the 94063 flats near Redwood Creek, the older fill and bay mud mean the ground moves slowly but constantly, and slabs crack along predictable lines. Up in the 94062 hills above Edgewood Park, the Franciscan melange creeps on a different schedule. We template and shim for the way the structure actually moves, not the way the drawing says it should.
Mr-Glass Models & Products We Service in Redwood City
We service the Mr-Glass frameless shower enclosure hardware, including pivot and hinge systems, the semi-frameless sliding shower door kits, the aluminum framed window and patio-door systems, and the tempered glass railing and partition systems. For parts, we use OEM Mr-Glass pivots, hinges, seals, and handles wherever the line is still active. Aftermarket pivots fit loosely and cause the sag that will eventually crack a tempered panel. When a model is discontinued, we fit a quality aftermarket equivalent rated for the panel weight, and we tell you that is what we are doing. On enclosures, we fix what is fixable: reseal, re-shim, replace hinges and sweeps. We only recommend full replacement when the glass is chipped, the temper is compromised, or the opening has moved too far to seal reliably.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Redwood City
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4500 – $12000 |
| Tub-to-Shower Conversion | $3500 – $10000 |
| Shower Replacement | $3000 – $8500 |
| Bathroom Remodel | $9000 – $28000 |
| Small Bathroom Remodel | $5000 – $12000 |
What drives cost in Redwood City is the condition of the opening, not the brand. If the alcove is square and the framing is solid, a stock Mr-Glass unit goes in fast and the price lands at the lower end. If we are opening walls to add blocking, squaring a curb, or reworking a hillside shower that has crept out of plumb, the labor climbs. Your free estimate includes measurements, an honest assessment of the framing, and a written line-item quote with no change orders. Call (833) 382-8544 to schedule one.
Serving Redwood City, CA — Our Local Coverage Area
We’re based in the Redwood City area and know this community well, including Woodside Mr-Glass service customers nearby. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Redwood City
On Redwood City’s flatlands, expansive clay and bay mud move slabs and curbs with the seasonal wet-dry cycle, throwing shower openings out of square. On the hillsides, wall creep from old retaining walls and decks does the same thing more slowly. The glass itself rarely warps. It is the opening that moved. We fix it by re-shimming and re-squaring the curb or opening before the panel is reset.
Sometimes, but usually not without prep work. Most 1940s and 1950s Redwood City bathrooms were framed without glass-blocking, and the alcove is rarely plumb. We can fit a stock Mr-Glass unit if the opening is close to true and the framing is sound. If not, we open the wall, add backing, and square the curb first. Either way, we will tell you which path applies before you spend a dollar.
Yes. Hillside homes in the 94062 area and Mr-Glass in West Menlo Park neighborhoods can rack slowly as un-engineered retaining walls settle or decks pull on the structure. That motion shows up in shower openings as an out-of-plumb condition. We check the opening for movement before we template. If there is active creep, we address the structural cause first so your Mr-Glass enclosure does not crack a season after install. Call (833) 382-8544 for an assessment.
We repair first. That means resealing, re-shimming, replacing hinges and sweeps, and swapping corroded hardware for OEM Mr-Glass parts. We recommend full replacement only when the glass is chipped, the temper is compromised, or the opening has moved so far it cannot seal reliably. Most failing Mr-Glass enclosures in Redwood City are repairable, and repair costs a fraction of replacement. Estimates are free, call (833) 382-8544.
Marine-layer humidity from the Bay and the Redwood Creek corridor keeps lower-floor bathrooms damp, especially ones with weak ventilation. That moisture attacks plated hardware and seals. Using OEM Mr-Glass hardware with proper grade materials and improving ventilation where practical usually slows it dramatically. For an exact fix and price, call (833) 382-8544. We serve the full Redwood City service area, details on our Redwood City service area page.
Service Areas Near Redwood City
Beyond Redwood City proper, we serve homeowners in Emerald Lake Hills, San Carlos, Woodside, Menlo Park, Atherton, and North Fair Oaks. Hillside lots in Emerald Lake Hills and San Carlos bring the same slope and soil conditions we see in the 94062 hills. See our Mr-Glass service in Emerald Lake Hills and Mr-Glass service in San Carlos pages for details.
Book Your Mr-Glass Service in Redwood City Today
If you are planning a walk-in shower, a frameless enclosure, or a tub-to-shower conversion in Redwood City, call (833) 382-8544. We schedule free estimates, measure on site, and give you a written line-item quote. One call, done right – that is the only way we know how to run a job.
Written by Noel Carranza, Owner at Gold Star Contractors, serving Redwood City and the surrounding Peninsula.