Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Highland, CA | Gold Star Contractors
We’re Gold Star Contractors, an independent contractor installing and repairing Jerith aluminum and vinyl fencing across Highland, including the 92346 ZIP. What sets our Jerith work apart here is simple: we understand how a Highland hillside addition or reroof pulls exterior structures into the Chapter 7A wildfire-resistance review. Call (833) 382-8544 and we’ll walk your property, check your existing fence line, and tell you what actually needs to happen.
Why Highland Residents Choose Us for Jerith Service
Jerith fencing is built for the long haul, but Highland’s specific conditions – Santa Ana winds, hot dry summers, and clay soil that heaves with winter rain – test every profile and post. We’ve installed and repaired Jerith vinyl and aluminum fence and rail along the foothill edge of the San Bernardino Mountains long enough to know how their profiles rack, weather, and fail here, and we offer San Bernardino Jerith service for these conditions.
Noel Carranza grew up in Anaheim’s Platinum Triangle watching older tract homes get renovated block by block, which is where he first got interested in how buildings actually go together. He studied construction technology at Fullerton College, then spent the better part of his twenties doing everything from concrete work to finish carpentry across Orange County. Today he runs our Highland fence and construction scopes the same way: dig the footing right the first time, check what’s underground, and build something that stays square.
We’re not a manufacturer affiliate. We buy Jerith products directly and install them to the manufacturer’s specs. One call, done right – that’s the only way we know how to run a job.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Highland
Here are the failure modes we see repeatedly on Jerith runs in Highland. Each one ties back to local conditions, not bad luck.
- UV chalking and fading on powder-coated aluminum. Jerith ornamental fence runs that face the mountains all day take relentless direct sun, and Santa Ana wind-driven grit slowly etches the powder coat. We see chalked finishes and oxidized rails on the Deluxe and Residential series within a handful of years when the run has no shade break. We’ll strip, clean, and respray where the structure is sound, and replace rails where the coating has failed through to bare metal.
- Post uplift on vinyl privacy lines. On exposed foothill lots in Highland, a Jerith vinyl privacy panel becomes a sail in a Santa Ana gust. We’ve dug out posts on Ashland and comparable 6-ft privacy lines that had been wrenched loose at the footing or cracked at the rail pocket. Footing depth and concrete type matter here more than most contractors admit.
- Gate sag and racking from heat-cycling soil. Highland’s clay soil expands after winter rain and shrinks through hot dry summers. That movement slowly torques Jerith aluminum gates out of square until the latch misses and the hinges bind. We reset the gate frame, re-shim the hinges, and where the post has moved we re-pour the footing.
- Sectional failures after fire-hardening rebuilds. When a hillside addition or reroof forces a Chapter 7A upgrade, the old fence line often gets flagged in the same review. We find old posts that can’t be re-used, panels that don’t meet the new fire-hardening scope, and runs where the footing is too shallow for the new requirements.
- Racked runs on sloped lots. Highland’s hillside properties slope enough that a straight run needs racked panels or steppe posts. Vinyl picket and post-and-rail runs get pulled out of level when the installer tries to force a flat panel along a grade change. We rack them properly so the top rail follows the ground and the pickets stay vertical.
Jerith Service in Highland: What Local Conditions Mean for Your Equipment
Here’s the part most Jerith providers never mention. Highland sits at the base of the San Bernardino Mountains in a high-fire-severity zone, and construction here is dominated by Chapter 7A wildfire-resistant requirements. Ignition-resistant roofing, ember-resistant vents, and non-combustible siding are standard on hillside rebuilds and additions in a way inland valley cities like Redlands or San Bernardino don’t trigger the same way. What that means for a Jerith owner: when a Highland homeowner pulls a permit for an addition or reroof on a foothill lot, inspectors frequently flag the existing fence line if it runs close to the structure. A wood-shake roof or open eave vent is obvious, but the fence often gets pulled into the review too. A Jerith vinyl or aluminum fence has to be documented as part of the fire-hardening scope – post spacing, footing depth, and material type all get looked at. We’ve handled enough of these reviews off Baseline east of the tract subdivisions to know what the inspectors want before they ask.
Jerith Models & Products We Service in Highland
We work across the full Jerith residential line: aluminum ornamental fence in the Residential and Deluxe series, vinyl privacy fence including Ashland and comparable 6-ft lines, aluminum picket runs like Ranch Rail, and vinyl picket and post-and-rail systems. When a run needs replacement rails, posts, caps, or gate hardware, we use genuine Jerith parts where they’re available so the profile and color match the existing installation. We only spec quality aftermarket hardware when the OEM piece is discontinued.
Our repair-vs-replace rule is straightforward. Two or three failed panels on sound footings? We repair it. Posts heaving, panels chalking through, or the run already non-compliant with Chapter 7A? We tell you straight that replacement beats patching. On a hillside property off Baseline east of the tract subdivisions, our crew tore out a wood privacy fence the owner wanted re-run in Jerith vinyl to match the Chapter 7A hardening of the house. We found two original posts had heaved and were pulling the panel pockets, so we re-poured the footings to engineered depth before setting the new Jerith panels and a gate at the walkway. We color-matched the aluminum gate hardware so the run read clean against the stucco. The owner got a wind-solid, ignition-resistant perimeter instead of another season of racking.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Highland
When a fence job runs through our books, it often sits alongside a bathroom or exterior scope from the same homeowner. Here’s what Jerith-adjacent construction work runs in Highland right now:
| Service | Typical Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
Fence-specific pricing depends on linear footage, slope, footing work, and whether the run gets pulled into a Chapter 7A review. Our free estimate covers the walk, the measurements, and a written line-item quote. Call (833) 382-8544 to get on the schedule.
Serving Highland, CA — Our Local Coverage Area
We’re based in the Highland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Highland
Vinyl is not ignition-resistant by itself, but a properly set Jerith vinyl privacy fence can satisfy the review when it’s documented as part of the structure’s fire-hardening scope – post spacing, clearance from the structure, and the ignition-resistant details on the house itself all factor in. The fence has to be part of the permit documentation, not treated as a separate cosmetic project. Call (833) 382-8544 and we’ll tell you what your specific hillside review will require.
Clay soil heave and heat-cycling are the usual causes. Highland’s winter rains swell the clay, summer drought shrinks it, and the post footing moves enough over time to torque the gate frame out of square. We reset and re-pour the footing to engineered depth, re-shim the hinges, and the gate clears the latch again. If your gate binds now, call (833) 382-8544 – we’ll diagnose it on the estimate visit.
Jerith’s aluminum powder coat holds better than most, but east-facing runs that take the mountains all day and Santa Ana wind-driven grit will eventually chalk and fade. We keep respray and touch-up options in the truck for Highland service calls. If the coating has failed through to bare metal, replacement rails cost less than another full run. Call (833) 382-8544 for a straight answer on whether yours is worth saving.
Yes. Jerith’s picket and post-and-rail lines rack cleanly along a grade when the installer knows the product’s limits. We set footings at stepped intervals where the slope is too steep for continuous racking, and the top rail follows the ground without pulling the pickets off vertical. If a previous installer forced a flat panel along a grade, we can usually re-align the run without replacing everything.
The inspector will ask for documentation showing the fence meets the fire-hardening scope – footing depth, post spacing, material type, and clearance from the structure. We prepare that scope for you and work alongside the reroof or addition permit so the fence gets signed off in the same review. Call (833) 382-8544 to get the fence pulled into your permit before you schedule the reroof.
Service Areas Near Highland
Our crews cover Highland and the surrounding inland corridor: Jerith service in Cypress, Jerith service in Newport Beach, plus Corona, Home Gardens, Norco, Eastvale, and Jurupa Valley. If you’re in one of those areas with a Jerith fence that needs work, call the same number: (833) 382-8544.
Book Your Jerith Service in Highland Today
We’ll walk your fence line, check the footings, and tell you what needs fixing and what can wait. Estimates are free. Call (833) 382-8544 to schedule yours in Highland.
Written by Noel Carranza, Owner at Gold Star Contractors, serving Highland and the Inland Empire with independent Jerith sales and service, including Jerith service in Muscoy.