Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Construction in Desert Hot Springs, CA | Gold Star Contractors
We provide independent ES Windows construction and replacement service throughout Desert Hot Springs, CA. What separates our ES Windows work here is that we build for the city’s twin realities: sand-laden wind off the San Gorgonio Pass and seismic activity along the San Andreas fault zone. Most window crews know one or the other. We plan for both. Call (833) 382-8544 for a free estimate on your Desert Hot Springs project.
Gold Star Contractors has installed and serviced ES Windows products across the Coachella Valley for over a decade, including ES Windows service in Desert Edge, Sky Valley, and hundreds of units in Desert Hot Springs homes exposed to wind and heat year-round. Our expertise comes from field experience, not from any manufacturer authorization, partnership, or warranty endorsement by ES Windows. We run a full-scope general contracting crew, so the same team that hangs your windows can re-square rough openings, repair the adjacent stucco, and seal the roofline flashing around the opening. One contractor, every trade, no handoff gaps.
Why Desert Hot Springs Residents Choose Us for ES Windows Service
Desert Hot Springs is not a forgiving place for fenestration. The housing stock spans mid-century block-and-stucco homes, spa-era conversions, and newer tract builds on graded desert lots, and nearly all of them face the same relentless pass wind. Frames rack, seals fail, vinyl pits. We know which ES Windows failure modes show up first in each part of town because we have pulled failed units out of the rough opening and seen it.
Noel Carranza, our owner and general contractor, grew up watching older Anaheim tract homes get renovated block by block, then studied construction technology at Fullerton College before spending years on concrete and finish carpentry crews across Orange County. He brings that same hands-on, measure-twice approach to every ES Windows job in Desert Hot Springs and ES Windows service in Sky Valley. When a 1960s block-and-stucco home near Palm Drive has sashes binding from foundation creep, we know what it takes to fix the opening, not just swap the window. We source OEM ES Windows parts whenever available: sashes, weatherstripping, glazing beads, hardware. When a model is discontinued, we turn to aftermarket equivalents that meet or exceed the original wind and UV ratings. No shortcuts on a window that has to hold a seal in 40-mph gusts.
Styles & brands we work with
Common ES Windows Construction Problems We Solve in Desert Hot Springs
- Sand-abraded weatherstripping on sliding doors. Wind-driven sand off the pass wears through the vinyl weatherstripping and glazing beads on ES Windows 4500 Series sliding glass doors. Within five to seven years, you feel air moving through the seam and see visible pitting on the track. We replace the OEM seals and re-bed the glazing beads so the door closes tight again.
- UV-warped vinyl frames on south and west elevations. Summer highs above 110°F degrade ES Windows vinyl frames faster here than almost anywhere in Southern California, especially on the sides of the house that take direct afternoon sun. Frames yellow, warp, and lose seal integrity. We assess whether the unit can be salvaged or if full replacement is the honest call.
- Seismic-racked frames in older block-and-stucco homes. Desert Hot Springs sits on the San Andreas fault zone, and expansive soils move more than most people realize. ES Windows frames rack out of square, sashes bind, and glass seals crack in homes that never had this problem when they were built. We re-square the rough opening and re-flash before installing the new unit.
- Wind uplift stripping awning and casement hinges. Persistent gusts off the San Gorgonio Pass pry at ES Windows 5500 Series awning and 7000 Series casement hinges over time, eventually stripping fasteners and letting water into the rough opening. We upgrade the fastening pattern and replace worn hardware before the leak spreads into the wall cavity.
- Seal failure causing visible fogging between panes. Intense UV and temperature swings break the insulating glass seal on ES Windows double-pane units. If the failure covers more than 30% of the unit, full replacement usually beats patching, especially given what Desert Hot Springs weather does to the next seal down the line.
ES Windows Service in Desert Hot Springs: What Local Conditions Mean for Your Equipment
Here is what most window crews miss about Desert Hot Springs: the city sits directly on the San Andreas fault zone, and the same expansive soils that crack driveways and tilt patio slabs also rack window frames out of square, even without a big earthquake. It is a slow, cumulative movement problem, and it shows up first in mid-century block-and-stucco homes built before modern foundation detailing. We routinely re-square and re-flash ES Windows openings after seismic events and during foundation repairs, using flexible sealants and shimmed fastening that accommodate movement without compromising the wind seal. A window that is square and sealed today can bind and leak in three years if the opening beneath it has shifted. That is why we treat the rough opening as part of the window system, not a separate problem.
Last month our crew replaced three failed ES Windows 2000 Series single-hung units in a 1960s block-and-stucco home near Palm Drive and Two Bunch Palms Trail, similar to ES Windows in Thousand Palms installations we handle. The frames had warped from years of 110°F-plus heat and sand-laden wind, and the sashes were binding due to slight foundation movement. We installed new ES Windows units with reinforced vinyl frames, upgraded weatherstripping, and flexible flashing, then re-squared the rough openings. The home now holds a tight seal against both wind and heat, which is exactly what a Desert Hot Springs window has to do.
ES Windows Models & Products We Service in Desert Hot Springs
We work on the full ES Windows product range you are likely to find in Desert Hot Springs homes and businesses. The 2000 Series Vinyl Single-Hung is the workhorse in older tract and manufactured-home builds. The 4500 Series Vinyl Sliding Glass Door shows up constantly in spa-era conversions and patio-facing rooms where wind exposure is at its worst. We also service 7000 Series Casement and 5500 Series Awning units, both of which face hinge and fastener strain from pass wind uplift. We keep common ES Windows hardware, weatherstripping, and glazing beads in our local stock so a Desert Hot Springs job does not stall waiting on a part shipment from out of state. If an exact OEM part is no longer manufactured, we source aftermarket equivalents tested to the same wind and UV standards. For full ES Windows sales & service details, see our brand overview page.
See the difference
Before
After
Before
After
Before
AfterES Windows Service Pricing in Desert Hot Springs
Pricing depends on the size of the opening, the model line, and what we find when we pull the old unit. Here is what Desert Hot Springs homeowners typically see:
| Service | Price Range |
|---|---|
| Window Replacement (per unit or project) | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair (around the window opening) | $400 – $1,800 |
Impact-rated ES Windows units cost more up front because the reinforced frames and laminated glass are engineered for a different level of wind and debris resistance, which matters in a wind corridor like this one. Every free estimate includes a written line-item quote, a look at the rough opening condition, and our repair-versus-replace recommendation. Call (833) 382-8544 to schedule yours in Desert Hot Springs.
Serving Desert Hot Springs, CA — Our Local Coverage Area
We’re based in the Desert Hot Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – ES Windows Construction in Desert Hot Springs
Persistent, sand-laden wind off the San Gorgonio Pass means fastening and flashing details that might pass inspection in a calmer part of the valley will fail here. We upgrade the fastening pattern on all ES Windows units we install in Desert Hot Springs, particularly on awning and casement hinges that take direct uplift. We also use flexible flashing at the rough opening so the seal survives both wind flex and minor ground movement. Call (833) 382-8544 and we will walk you through what your specific elevation and exposure require.
They hold up better than most vinyl lines, but no vinyl frame on earth is immune to consistent 110°F-plus heat and intense UV on south and west elevations. The honest answer is that ES Windows frames degrade slower, but they do eventually yellow, soften, and lose seal integrity if they are taking direct afternoon sun for years. The right glazing package and exterior shade strategy extend the life substantially. We can tell you whether your existing units are worth keeping or past the point of cost-effective repair.
In Desert Hot Springs, the usual cause is the ground moving underneath your house, not the window hardware failing. Expansive soils and fault-adjacent settling rack the rough opening slightly out of square, which binds the sash. We see this most often in older block-and-stucco homes and manufactured-home skirting foundations. The fix is re-squaring the opening or adjusting the reveal, not just forcing the sash. Call (833) 382-8544 for an inspection; we will diagnose what actually moved.
Yes, we do. Manufactured homes present a different challenge because the wall framing is often shallower and the rough openings are less standardized than site-built homes. We routinely install ES Windows 2000 Series units in manufactured homes throughout the 92240 and 92241 ZIP codes and provide ES Windows repair in Garnet, adjusting the rough opening depth and flashing detail to match the home’s actual construction rather than guessing. The estimate is free, and it does not matter whether your home was built in a factory or on a slab.
Most Desert Hot Springs homes fall between $4,500 and $15,000 for a standard ES Windows replacement project, depending on the number of units and the condition of the rough openings. Impact-rated replacement pushes the range higher, typically $8,000 to $25,000, because you are buying a fundamentally different glass and frame package. For an exact quote, call (833) 382-8544 and we will send a crew out to measure and assess the openings, including any foundation movement that affects the install.
Service Areas Near Desert Hot Springs
Our crews work throughout the Desert Hot Springs service area and the surrounding Coachella Valley. We also provide ES Windows service in Silver Lakes for clients in the nearby community, and ES Windows service in Cathedral City for homeowners further down-valley. If you are within a reasonable drive of Desert Hot Springs, we can likely reach your project.
Book Your ES Windows Service in Desert Hot Springs Today
If your ES Windows are binding, leaking, or losing their seal, we can help. Call (833) 382-8544 to schedule a free estimate in Desert Hot Springs. Noel and our crew will give you an honest repair-versus-replace recommendation based on what your home actually faces from the wind and the ground beneath it. One call, done right, that is the only way we know how to run a job.
Written by Noel Carranza, Owner at Gold Star Contractors, serving Desert Hot Springs and the Coachella Valley.