Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Felton, CA | Gold Star Contractors
We provide independent KraftMaid cabinet installation, refacing, and full kitchen remodeling across Felton, Scotts Valley, and the San Lorenzo Valley. What separates our KraftMaid work here is simple: we’ve pulled enough water-softened Vantage boxes out of sloped, pier-and-beam homes to know exactly what fails and what holds up. If you need KraftMaid cabinets fitted, repaired, or rebuilt into a Felton kitchen, call (833) 382-8544 for a free estimate.
Gold Star Contractors is not a KraftMaid dealer and we’re not manufacturer-authorized. We’re a licensed general contractor that installs, services, and refaces KraftMaid cabinetry already in Felton homes or specified for new work. That distinction matters because we tell owners the truth about whether to save a box or replace it. Noel Carranza runs our operation with the same approach he learned doing concrete and finish carpentry across Southern California: look at the actual conditions before you quote the job. One call, done right – that’s the only way we know how to run a job.
Why Felton Residents Choose Us for KraftMaid Service
KraftMaid cabinetry shows up in a lot of San Lorenzo Valley kitchens, from Ben Lomond mid-century redwood cabins to post-CZU rebuilds. We know the Vantage series box construction, the Waypoint and Innovation lines, and the full-overlay hardwood door profiles because we’ve installed and repaired all of them in Felton homes. Most contractors treat cabinet work as a finish trade. We treat it as structural work that has to survive redwood-shade humidity, out-of-level floors, and WUI code requirements.
When a Felton homeowner calls us about a sticking KraftMaid door or a soft base cabinet, we start by looking at what the house is doing to the cabinet. Sloped pier-and-beam subfloors, winter moisture cycles, and slow under-sink leaks all show up in specific ways in KraftMaid boxes. We source OEM KraftMaid doors, drawer fronts, and hinges when the line is still supported, and we match quality aftermarket hardware when OEM is discontinued or takes three weeks to arrive. For Felton homeowners who want the work done without juggling a cabinet sub, a countertop fabricator, and a structural carpenter, we handle the full scope. KraftMaid sales & service isn’t what we do – we’re the crew that makes the cabinets work in your house.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Felton
- Partial-overlay doors swelling and binding at the stiles. Felton sits under redwood canopy where interior relative humidity runs high all winter. Older Vantage-series partial-overlay doors absorb that moisture and bind at the stiles. We re-hinge, adjust reveals, and sometimes refit the doors so they close clean without planing away the finish.
- Painted finishes checking and peeling along the sink run and dishwasher bay. The coastal-influenced moisture cycles in Felton hit painted KraftMaid finishes hardest where steam and heat repeat daily. We strip, prime, and refinish those faces with a process that holds up to the valley’s humidity swings, or we replace the doors outright when the checking has gone too deep.
- Particleboard-core Vantage boxes softening at the toe kick and under-sink base. Slow leaks go unnoticed in pier-and-beam homes because water drips into the crawl space instead of pooling on the slab. By the time a Felton homeowner spots the swelling, the box core is usually shot. We pull the base, check the subfloor, and rebuild the platform before setting a new box – not on top of the rot.
- Backs and corner gussets separating on cabinets shimmed against sloped floors. When an installer shims a KraftMaid run to a sloped Felton floor without scribing, the cabinet frame carries stress it wasn’t built for. Backs peel away, gussets split, and doors rack. We re-set the run squared to the room, which often means scribing the base to the actual floor plane.
- Wall cabinets pulling away from redwood-era studs. Older Felton cabins have framing that’s moved over decades. KraftMaid uppers fastened to undersized or rotted studs start to gap at the crown. We add blocking, re-anchor, and re-align the run so the doors don’t telegraph the wall’s movement.
KraftMaid Service in Felton: What Local Conditions Mean for Your Equipment
Because so many Felton homes sit on pier-and-beam foundations set into slopes, a KraftMaid run has to be scribed and shimmed to a floor that is rarely level. That’s not a detail – it’s the starting point. A cabinet line built square will rack, bind, and separate if you force it onto a floor that drops an inch and a half over eight feet. We’ve seen installer crews from over the hill treat Felton like a flat-lot city job, shim the low end, and walk away. Six months later the doors bind and the corner gussets crack. The right approach is to establish the true floor plane, scribe the base and fillers, and set the boxes level. And if the kitchen sits inside the WUI zone – as much of Felton does after the CZU Lightning Complex fire remapped the valley – we plan for Chapter 7A-compliant detailing around the cabinetry work, the kind of ignition-resistant material and construction standard that lower-elevation cabinet installers never see. This is why Felton service area work is different from the same job in Santa Cruz or San Jose. The mountains don’t give you level ground, and the burn scar doesn’t give you a pass on code.
On a post-CZU rebuild off one of Felton’s mountain roads, our crew pulled a water-softened KraftMaid Vantage base cabinet that had been sitting against an out-of-level pier-and-beam subfloor. We rebuilt the platform and shims, set a new KraftMaid shaker run squared to the room, refaced the surviving uppers with OEM doors and re-hinged them, then set a quartz top over the new layout. The homeowner kept sound cabinetry and got a full kitchen without tearing out what didn’t need to go.
KraftMaid Models & Products We Service in Felton
We work on the KraftMaid Vantage series, the Waypoint and Innovation cabinetry lines, and the full-overlay hardwood door styles including raised-panel and shaker profiles. Pre-finished maple and painted KraftMaid finishes from older Felton kitchen remodels are common in our service calls. Where the line is still supported, we order OEM doors, drawer fronts, hinges, and touch-up finish. Where OEM is discontinued or stuck in a slow supply chain, we match quality aftermarket hardware that fits the existing footprint. We stock common hinge and clip hardware locally so a simple repair doesn’t wait on a freight shipment. For full kitchen remodels, we specify KraftMaid boxes with the right overlay and finish for the room, then handle countertop, backsplash, and fixture work under the same project team.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Felton
KraftMaid work in Mount Hermon and Felton prices by scope, not by guess. Here’s what we see across the valley:
| Service | Felton Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Countertop Installation | $2,000 – $6,500 |
What moves the number in Felton and Lompico: whether the floor needs scribing and shimming (most do), whether the existing boxes are salvageable or too far gone, whether you’re in the WUI zone with Chapter 7A detailing, and what countertop material you’re pairing with the cabinets. A free estimate from us includes a look at the floor plane, the existing cabinet condition, and a line-item number – not a ballpark. Call (833) 382-8544 and we’ll come out.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Felton
Yes, in most cases we can order OEM KraftMaid doors and drawer fronts in the matching style and finish when the line is still supported. For discontinued finishes, we work with a local finisher to match tone and sheen on new door stock. Call (833) 382-8544 and we’ll tell you what’s still available for your exact door profile.
Winter in Felton means redwood-shade humidity that pushes interior RH high enough to swell partial-overlay KraftMaid doors at the stiles. The doors absorb moisture, expand, and bind against each other or the face frame. The fix is usually re-hinging and adjusting reveals, not planing the doors. We can set the doors so they clear even through the wettest valley months.
If your Felton home sits in the wildland-urban interface zone, Chapter 7A of the California Building Code applies to the building envelope and certain exterior details. Interior cabinetry is not governed by 7A, but kitchens on exterior walls or near opened-up rebuilds often need ignition-resistant detailing around the cabinet-run perimeter. We coordinate with the building official’s requirements for your specific Felton parcel. Call (833) 382-8544 for a walk-through of what your kitchen will actually need.
We establish the true floor plane with a laser, then scribe the base and filler strips to match the slope before setting the boxes level. On pier-and-beam Felton homes, we check the subfloor structure first – shimming over a failed joist or a soft mudsill creates a bigger problem behind the cabinet. The boxes get set square to the room, not bent to the floor.
Yes, and it’s a common Felton upgrade. We check the existing KraftMaid bases for water damage and racking first, reinforce or replace what needs it, and set the quartz over a properly supported and leveled cabinet run. The $2,000 – $6,500 countertop range depends on slab size, edge profile, and how much structural prep the old cabinets need. Call (833) 382-8544 for a precise number on your kitchen.
Service Areas Near Felton
We serve Felton and the surrounding San Lorenzo Valley communities, including Boulder Creek, Ben Lomond, Mount Hermon, and Scotts Valley. Our KraftMaid work also reaches KraftMaid service in Lexington Hills and KraftMaid service in Seven Trees for homeowners on the valley’s edge.
Book Your KraftMaid Service in Felton Today
If your KraftMaid cabinets are binding, softening, or just not right for the kitchen you want, call (833) 382-8544. We’ll schedule a time to look at the actual conditions in your Felton home and give you a free, line-item estimate. No showroom pitch – just a straight read on what your cabinets need.
Written by Noel Carranza, Owner at Gold Star Contractors, serving Felton and the San Lorenzo Valley.