Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Felton, CA | Gold Star Contractors
We provide independent Dvele construction service across Felton, from panel repairs and foundation re-detailing to full kitchen remodels and additions that tie into factory-built shells. What sets our Dvele work apart here is simple: we understand how a panelized home engineered on a level factory floor behaves when it lands on a redwood-shaded slope with buried old-growth roots underneath. Noel Carranza leads our team, and we’ve spent enough time opening up Dvele panels in 95018 to know exactly what the mountain gives you when you cut into one. Call (833) 382-8544 for a free estimate.
Why Felton Residents Choose Us for Dvele Service
Most contractors in the San Lorenzo Valley have never read a Dvele panel drawing. We have. We know how the LUMO series shell comes off the truck, where the hold-downs land, and what the factory roof cassettes need before they meet Felton’s WUI code inspectors. That familiarity means we spot problems early, before a panel gets closed up and a five-figure fix turns into a six-figure regret.
We’re local to the 95018 area, not a crew driving up from San Jose. We know the side streets off Highway 9, the narrow drives, the lots where the footing plan has to change because a stump the size of a bathtub is sitting where the concrete goes. Noel grew up watching tract homes get rebuilt in Anaheim and studied construction technology at Fullerton College before spending years on concrete and finish carpentry crews. That background, plus a decade of multi-trade work across Orange County, is what he brings to every Dvele job up here. One call, done right, that’s the only way we know how to run a job.
Styles & brands we work with
Common Dvele Construction Problems We Solve in Felton
- Hold-down and panel-to-foundation connections that don’t fit the slope. Dvele’s engineered drawings assume a level footing. On Felton’s pier-and-beam lots where grade changes within a few feet, those factory hold-downs frequently bear on the wrong point or sit over undermined soil. We re-detail the connection to match the actual load path before the inspector ever shows up.
- Roof cassette penetrations that fail Chapter 7A WUI inspection. Dvele roof assemblies ship with standard ridge, eave, and vent detailing. Felton sits inside the wildland-urban interface, and the ignition-resistant requirements are stricter than anything inland crews scope. We re-flash and re-detail those penetrations with Chapter 7A materials so the assembly passes the first time.
- Panel seam leaks from redwood shade and constant damp. Felton’s canopy keeps moisture on roofs and walls for months. Moss grows on caulk joints. Factory underlayment edges wick water. We reseal and re-flash panel seams with materials rated for the valley’s rainfall, not the dry-climate spec the factory shipped.
- Hidden field modifications by earlier builders. We regularly open a Dvele wall for an addition and find cut panels, buried flashing, or a penetration nobody documented. That’s not a factory defect, it’s what happens when someone without Dvele training touched the shell. We map what’s actually inside before we cut.
- Wood-bearing footings undermined by root channels. Buried old-growth roots rot and leave channels under piers. Damp follows the channel, and the footing loses bearing. We’ve pulled compromised piers on more Felton Dvele lots than we can count, then poured new footings sized for the panel’s actual load path.
Dvele Service in Felton: What Local Conditions Mean for Your Equipment
Here’s the thing about Felton that changes every Dvele job: the lots sit under redwood canopy on slopes where footing excavations routinely hit buried old-growth stumps and root mass that must be pulled before any concrete pours. Contractors from Santa Cruz or San Jose will write a bid assuming the drawings are right. They’ll hit the stump, charge a change order, or worse, pour around it and compromise the bearing. We scope for it from day one because we work here. The root mass under Felton isn’t a surprise to us, it’s the starting condition.
And any deck or addition touching the WUI zone needs Chapter 7A ignition-resistant materials, a code layer inland crews never scope. That’s not a paperwork formality. It’s the difference between a Dvele shell that passes its Felton inspection and one that gets red-tagged. We build both realities into every estimate.
Dvele Models & Products We Service in Felton
We work on the full Dvele lineup found around Felton: the LUMO series panelized single-family homes, the high-performance modular wall and roof panel assemblies, and the factory-finished panelized ADU and detached-structure packages now popping up on San Lorenzo Valley lots. For parts, we have a clear stance: Dvele-specified or equivalently rated connection hardware, sealants, and underlayment at the panel joints come first. We go aftermarket only where a component meets the same fire and weather rating at an honest cost. On a Dvele shell, we repair locally wherever the panel is sound and replace only where moisture or fire damage has compromised the assembly. Resealing and re-flashing beats tearing out a cassette every time. Our Dvele sales & service page covers the broader scope of what we handle across the brand.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Felton
| Project | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
| Home Addition | $45,000 – $130,000 |
Every estimate includes a written, line-item breakdown of what we’re doing, what materials we’re specifying, and what the site conditions actually require. No vague allowances, no “we’ll figure it out later.” Call (833) 382-8544 for an exact quote, estimates are free and we’ll walk the lot with you.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well, and we also offer Dvele in Scotts Valley. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Felton
Can you add a room to a Dvele panelized home on a sloped Felton lot?
Yes, but the work is heavier than adding to a stick-built house. We have to open the existing Dvele wall, map the factory hold-downs and panel joints, and re-detail the tie-in for the slope and the WUI code before we frame anything new. That’s not a limitation, it’s the right sequence. We’ve done it on lots from Felton’s redwood-shaded side streets to the deeper 95018 parcels, and the addition passes inspection when the tie-in is detailed correctly. Call (833) 382-8544 and we’ll walk your lot.
Does a Dvele roof or wall repair in Felton need Chapter 7A fire-rated materials?
Yes, anywhere within the WUI, and most of Felton sits inside that zone. Any penetration, seam, flashing, or underlayment we touch on a Dvele roof or wall gets upgraded to Chapter 7A ignition-resistant detailing. That’s a code requirement up here, and it’s a layer we scope before we quote so there’s no mid-job surprise. Call (833) 382-8544 for a repair estimate that reflects what your lot actually needs.
Why does our Dvele panel seam keep leaking in the redwood shade?
Because the factory sealant and underlayment edges were not rated for Felton’s months-long damp. Redwood canopy means walls and roofs barely dry out between storms, moss gets into the caulk joints, and the seam wicks water into the panel. The fix is resealing and re-flashing with materials rated for the San Lorenzo Valley’s rainfall, not the dry-climate spec the factory shipped. We fix the seam once, with the right materials. Call (833) 382-8544 for a quote.
Are you authorized or affiliated with Dvele?
No. We’re an independent construction firm that works on Dvele panelized homes across the San Lorenzo Valley. We’re not a dealer, not a factory rep, and not authorized by the manufacturer. Our credibility comes from solving the fit between a factory-engineered shell and Felton’s slopes, roots, and WUI code layer. We read Dvele’s panel drawings against what’s actually under your lot, and we tell you plainly what the shell needs before it’s closed up.
What does a Dvele-tied kitchen remodel run in Felton?
A Dvele-tied kitchen remodel in Felton typically runs $14,000 – $45,000 depending on cabinet grade, countertop material, and how much we have to open the shell to relocate plumbing or electrical. A smaller kitchen remodel with stock or semi-custom cabinets starts around $9,000. Every estimate includes a line-item breakdown, and if the shell needs resealing or re-flashing where we cut in, that’s scoped up front. Call (833) 382-8544 for a free, exact quote on your kitchen.
Service Areas Near Felton
Our Dvele construction service covers Felton and the surrounding San Lorenzo Valley, including Ben Lomond, Mount Hermon, Scotts Valley, and the communities up and down Highway 9. We also run Dvele service in Lexington Hills and Dvele service in Seven Trees. If your lot sits anywhere in the 95018 corridor, call us and we’ll come look. Our Felton service area page has the full coverage map.
Book Your Dvele Service in Felton Today
If you own a Dvele home in Felton and something’s not right, or you’re planning an addition, a kitchen remodel, or a roof repair that touches the shell, call (833) 382-8544. We’ll walk your lot, read the existing panels, and give you a written estimate that accounts for what’s actually under the redwoods. Noel and the team are ready to start when you are.
Written by Noel Carranza, Owner at Gold Star Contractors, serving Felton and the San Lorenzo Valley.