Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in San Francisco, CA | Gold Star Contractors
We provide independent Ameristar steel door and frame service across San Francisco, from the Richmond’s fog belt to the Mission’s steep side streets. What makes our Ameristar work here different comes down to one thing: we understand how soft-story retrofit re-framing, bay-fill settlement, and salt-laden coastal air actually change the way these doors perform. If your Ameristar entry door drags, rusts at the bottom rail, or no longer latches square, call (833) 382-8544 and we’ll diagnose it properly.
Why San Francisco Residents Choose Us for Ameristar Service
We’ve worked Ameristar sales & service long enough to know which hinges, strikes, and weatherseal profiles hold up on a fog-belt address and which ones fail first. Because we’re independent, not manufacturer-affiliated, we diagnose what’s actually failing on your door or frame instead of steering you back to whatever the manufacturer wants to sell. Noel Carranza, our owner and general contractor, studied construction technology at Fullerton College and spent years doing finish carpentry and concrete work before building this operation. One call, done right – that’s the only way we know how to run a job. That means we tell you straight when a slab is worth re-hanging and when replacement is the better spend.
Styles & brands we work with
Common Ameristar Construction Problems We Solve in San Francisco
- Corrosion at the bottom rail and threshold. Salt-laden coastal fog drives moisture into the seaward face of Ameristar steel doors, and the paint and primer fail first there. We see rust starting from the inside of the slab edge on Richmond and Sunset addresses within a few years of install.
- Racked frames on steep downhill lots. In Noe Valley and the Mission, a downhill-side door frame settles and racks out of square. The Ameristar slab drags the strike jamb and the multi-point latch stops lining up. Re-shimming to a new header fixes it; forcing the slab doesn’t.
- Rot behind the steel frame in zero-lot-line side yards. Victorian infill with tight side yards leaves Ameristar side-entry doors under deep overhangs. Runoff and slow winter drying rot the wood blocking behind the steel frame even though the door face looks fine. You won’t see it until the frame shifts.
- Daylight at the corners on pre-1906 rough openings. Original rough openings in wood-frame walls are rarely plumb. An Ameristar door installed without re-shimming to a new header shows gaps at the corners and weatherstripping that never seals. We correct the opening, not just caulk the gap.
- Soft-story retrofit displacement. When the city’s mandatory Soft-Story Retrofit Ordinance re-frames a ground-floor garage opening with new shear walls and hold-downs, any Ameristar door in that wall has to be re-set. The original 1900s jamb is gone or moved, and the door needs re-anchoring to the new structure.
Ameristar Service in San Francisco: What Local Conditions Mean for Your Equipment
San Francisco’s mandatory Soft-Story Retrofit Ordinance means ground-floor garage and storefront openings in wood-frame buildings are routinely being re-framed with new shear walls and hold-downs. When that happens, any Ameristar entry or garage-side door in that opening has to be re-set into a wall that just moved, not the original jamb. We’ve handled exactly this on a Noe Valley Victorian with a downhill-side garage. The retrofit had just re-framed the ground-floor opening and our crew found the existing Ameristar steel entry slab dragging hard against a strike jamb that had racked maybe three-quarters of an inch. We pulled the unit, re-shimmed and re-anchored the frame to the new shear wall, replaced a rusted bottom-rail sweep and OEM hinges, and set a new threshold with proper flashing so winter runoff stops wicking into the wood blocking. The door latches clean now and seals against the fog-driven weather that address actually gets. That’s the difference between knowing Ameristar as a brand and knowing how Ameristar doors behave in San Francisco specifically.
Ameristar Models & Products We Service in San Francisco
We service Ameristar steel entry doors across the Legacy and Harmony collections, decorative glass and sidelite door units, storm and screen door lines, and the steel frame and jamb kits sold alongside their door slabs, including Mission District Ameristar service. On parts, we use Ameristar OEM hinges, strikes, and weatherseal where the original profile matters for fit. Where the OEM part is the weak link, like threshold and sweep kits, we go with a quality aftermarket option that holds up better to San Francisco’s wet winters. We keep common profiles stocked locally so turnaround on a re-hang or hardware replacement doesn’t leave your entry exposed for weeks.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in San Francisco
What you’ll pay depends on whether we’re re-hanging a sound slab, replacing hardware, or pulling and re-setting a frame after a retrofit. Here’s what our Ameristar-related work typically runs with a General Contractor – San Francisco:
| Service | Typical Range |
|---|---|
| Bathroom Remodel | $10,620 – $33,040 |
| Small Bathroom Remodel | $5,900 – $14,160 |
| Tile & Flooring (per bathroom scope) | $945 – $2,950 |
| Gutters & Accessories | $470 – $2,125 |
We also handle full bathroom remodeling, tile and flooring, and gutters and accessories alongside Ameristar door work, so you’re not juggling a separate contractor for the threshold, the downspout, and the shower. Your free estimate includes a straight diagnosis of the door and a written line-item quote. Call (833) 382-8544 and we’ll put numbers to it before any work starts.
Serving San Francisco, CA — Our Local Coverage Area
We’re based in the San Francisco area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in San Francisco
Yes, and it’s one of the most common reasons we get called out in San Francisco. When a retrofit re-frames a ground-floor opening with shear walls and hold-downs, the original jamb is often removed or shifted, and the door has to be re-set into the new structure. If your door was in place before the retrofit, it likely needs re-shimming, re-anchoring, and new weatherseal. Call (833) 382-8544 and we’ll tell you exactly what your opening needs.
San Francisco’s salt-laden coastal fog condenses on the seaward face of the door and collects at the bottom rail and threshold. Paint and primer fail there first, then the slab edge starts rusting from the inside. It’s a moisture and drainage problem, not a manufacturing defect, and the fix is proper flashing, a quality threshold, and a sweep kit that actually sheds water. We diagnose the source before we touch the door.
Usually yes. We’ve matched Ameristar Legacy and Harmony slabs with decorative glass and sidelite units across plenty of Edwardian entries in San Francisco. We match the existing trim profile, glass pattern, and finish, and we’ll tell you honestly when a replacement slab will look right against the original woodwork and when the frame itself should go too. A free estimate covers matching feasibility before you commit.
In Visitacion Valley and across San Francisco it’s typically the house. Wet winters swell the wood framing and blocking around the steel frame, especially on older Victorian and Edwardian buildings. The door slab itself doesn’t change much, but the frame shifts just enough to make the slab drag. If it also sticks after a retrofit or on a steep downhill lot, the frame has likely racked and needs re-shimming. We can tell you which it is in one visit.
We do. Gutters and accessories are part of our scope, and on San Francisco’s slow-drying wet season, a clogged downspout dumping roof water at the base of an Ameristar door is usually what’s feeding the rust and rot. We’ll inspect the drainage path alongside the door and quote gutter work if it’s needed. Call (833) 382-8544 for a free estimate that covers both the door and the water getting to it.
Service Areas Near San Francisco
We serve the full San Francisco service area, including ZIP codes 94111, 94112, 94114, and 94115. For clients on the northeast side, we also provide Ameristar service in Chinatown. Across the bay, we handle Ameristar service in Tiburon as well.
Book Your Ameristar Service in San Francisco Today
If your Ameristar door is rusting, racked, or just not latching the way it used to, call (833) 382-8544. We’ll schedule a free estimate, diagnose what’s actually wrong, and give you a straight answer on repair versus replacement. No brand pitch, just the fix your San Francisco entry actually needs.
Written by Noel Carranza, Owner at Gold Star Contractors, serving San Francisco since day one.