Ameristar Construction in Fullerton, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Ameristar Construction in Fullerton, CA | Gold Star Contractors

We install and service Ameristar HVAC equipment as part of larger construction scopes across Fullerton’s 92833, 92834, and 92835 ZIP codes and nearby areas including Ameristar in Anaheim, and we’re not a manufacturer-authorized dealer. What makes our Ameristar work different here is that we also handle the construction around the equipment: kitchen remodels, bath renovations, additions, and the framing, electrical, and drainage work those jobs demand. When we set an Ameristar unit in Fullerton, we’re also licensing the permit, rebuilding the closet or pad it sits on, and making sure the ductwork and returns actually fit the space. Call (833) 382-8544 for a free estimate on any Ameristar-inclusive project.

Construction worker using a miter saw on a home renovation project in Fullerton, CA

Call (833) 382-8544

Gold Star Contractors has built entire kitchen and bath scopes around Ameristar equipment, from Ameristar sales & service to full remodels where the HVAC relocation is the first trade in, not an afterthought. See our Fullerton service area for full coverage details.

Why Fullerton Residents Choose Us for Ameristar Service

We work on Ameristar equipment in pre-war bungalows near downtown, mid-century tracts down Orangethorpe and the 57 corridor, and hillside customs in Raymond Hills where the airflow math changes with every room. That breadth matters because a condenser on a 1920s pier-and-beam lot has different clearance, drainage, and electrical realities than one on a 1970s slab. Noel Carranza, our owner and general contractor, studied construction technology at Fullerton College and spent years doing concrete, framing, and finish carpentry across Orange County before building this operation. He knows Fullerton’s permit counters, its older wiring, and the way Santa Ana wind cuts through canyon-edge yards. One call, done right, that’s the only way we know how to run a job.

We specify Ameristar equipment, manage the full install, and stand behind the result alongside every other trade. Your home is too important to coordinate five different contractors.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common Ameristar Construction Problems We Solve in Fullerton

  • Condenser coil corrosion from Santa Ana dust. Fullerton’s dry wind episodes push grit into canyon-edge and hillside yards, and Ameristar condenser fins trap that dust fast. We clean coil faces, check static pressure, and relocate or shield units where canyon airflow makes corrosion a recurring problem.
  • Air handler cabinet failure in older bungalow closets. Pre-1950s homes near downtown Fullerton were often built with single-wall construction and poor sealing. Moisture finds its way into HVAC closets, rots the framing around the Ameristar air handler, and then the equipment shifts and the condensate line breaks slope. We rebuild the platform correctly before remounting the unit.
  • Electrical disconnects that no longer match modern equipment. 1950s through 1970s tract homes across south and east Fullerton frequently have original circuit sizing that was never meant for a modern Ameristar replacement. We pull the permit, run new line sets and disconnects, and bring the circuit to current code before the unit ever fires up.
  • Compressor short-cycling after a kitchen remodel. We see this all the time in Fullerton: a kitchen gets gutted, the return gets buried behind new cabinets or a peninsula, and the Ameristar compressor starts cycling on and off. We fix the return path, sometimes re-route ducting through adjacent framing, and the unit settles back into normal run times.
  • Relocation challenges in garage conversions and ADUs. When a Fullerton homeowner converts a garage into living space, the Ameristar air handler has to move. Tight clearances, new supply runs, and the original slab’s drain routing all complicate the job. We handle the framing, the condensate routing, and the equipment relocation as one scope.

Ameristar Service in Fullerton: What Local Conditions Mean for Your Equipment

Fullerton’s downtown-adjacent lots were laid over vanished citrus groves, so excavation for an Ameristar equipment pad, kitchen bump-out, or added condenser line set routinely uncovers old irrigation runs, cinder-block grove walls, and undocumented utilities that have to be rerouted before the equipment can go in. We’ve dug more than a few Fullerton trenches where the original grove-era irrigation pipe was still holding water pressure decades after the trees were gone. If you’re adding a condenser pad on a lot near the SOCO/Commonwealth corridor or anywhere the pre-war grid still shows through, expect surprises and plan for them. We locate and re-route what’s buried, then set the Ameristar unit on a level, code-compliant base, the same way we handle Ameristar repair in La Habra. That’s not a step every contractor builds into the quote, and it should be.

Fullerton’s mix of permit regimes also shapes Ameristar work here. A hillside property near the Coyote Hills falls under WUI/Chapter 7A ignition-resistant rules, which change how equipment pads, electrical disconnects, and even condenser screening must be detailed. A downtown bungalow may sit in a historic-adjacent review zone. A mid-century tract on the east side goes through straightforward resi permitting. Cross-discipline fluency across all three, that’s what Fullerton actually requires.

We ran into this on a 1920s bungalow near the SOCO/Commonwealth corridor: a kitchen remodel depended on relocating an Ameristar air handler out of a cramped closet with failing framing. Our crew found the closet floor was built over an old grove-era utility trench, so we rebuilt the platform, rerouted the condensate line, and set the new Ameristar equipment correctly before finishing the cabinets and tile. The kitchen went in clean, and the unit stopped short-cycling.

Ameristar Models & Products We Service in Fullerton

We install and service Ameristar 17 SEER2 split-system air conditioners, commonly paired with kitchen and bath remodels in older Fullerton homes and Ameristar in Placentia properties where the HVAC closet gets relocated. We also work on Ameristar furnace and air-handler lines in tract homes and garage-conversion ADUs, plus Ameristar packaged units found on larger custom hillside properties. For parts, we source OEM Ameristar compressors, boards, and coils where the manufacturer still supplies them, and use quality aftermarket equivalents only for accessible, non-critical components. When an Ameristar unit in Fullerton is past its economic life and repair quotes exceed the value of a replacement, we tell homeowners straight rather than stacking repairs.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ameristar Service Pricing in Fullerton

Construction pricing in Fullerton tracks the scope, the age of the house, and what we find under the surface. A tight kitchen remodel in a mid-century tract runs differently than a full gut in a Raymond Hills custom. Here are the ranges for the specific scopes most Ameristar-inclusive projects involve:

Construction worker using a miter saw on a home renovation project in Fullerton, CA
Project Type Fullerton Price Range
Kitchen Remodel $14,000 – $45,000
Bathroom Remodel $9,000 – $28,000
Home Addition $45,000 – $130,000
Small Kitchen Remodel $9,000 – $20,000
Walk-In Shower Installation $4,500 – $12,000

Your free estimate includes a line-item scope, a permit plan, and a written breakdown of which parts are OEM and which are aftermarket. Call (833) 382-8544 for an exact quote on your Ameristar-inclusive project in Fullerton.

Serving Fullerton, CA — Our Local Coverage Area

We’re based in the Fullerton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Ameristar Construction in Fullerton

Service Areas Near Fullerton

Gold Star Contractors provides Ameristar construction service across Fullerton and neighboring communities including Ameristar service in Lakeland Village, Ameristar service in Loma Linda, Corona, Norco, and Eastvale. If your property sits just outside Fullerton’s 92833-92835 boundaries, call us and we’ll let you know if we service your street.

Book Your Ameristar Service in Fullerton Today

Tell us what you’re planning, and we’ll come out, walk the property, and put a real number on it. Call (833) 382-8544 to schedule your free Ameristar-inclusive construction estimate in Fullerton today.

Written by Noel Carranza, Owner at Gold Star Contractors, serving Fullerton and Orange County with Ameristar-inclusive construction scopes.

Need Construction help in Fullerton? Licensed & insured · Written quotes before work starts response · free estimates
Call (833) 382-8544
Areas We Serve

Request a Free Estimate in Fullerton

Tell us what you need — Gold Star Contractors responds fast. No obligation.

When you send us your details, you agree to the terms of our Privacy Policy and consent to receive communications by call, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Text Now
Call Now - 24/7 Dispatch