Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in San Francisco, CA | Gold Star Contractors
We’re an independent Mr-Glass service contractor working across San Francisco’s steep hills and tight Victorians, and the quick answer is this: Mr-Glass shower enclosures and glass systems fail here in ways they don’t in flat, dry cities, so we template, install, and repair with the building’s movement and marine air in mind. We’re not a Mr-Glass authorized dealer or affiliate, and that matters because our only job is fitting the glass to what your building actually is, not what a spec sheet assumes. If you need a Mr-Glass frameless shower door, tub-to-shower conversion, or a full walk-in enclosure in San Francisco, call (833) 382-8544 and we’ll schedule a free estimate.

Why San Francisco Residents Choose Us for Mr-Glass Service
Most San Francisco homes were built before 1940, and their walls have been settling, shifting, and absorbing fog for a century. That’s the context we bring to every Mr-Glass job, and it’s why homeowners in the Mission, Noe Valley, the Richmond, and the Sunset keep our number. Noel Carranza, our owner, grew up watching older tract homes get renovated block by block in Anaheim, then spent his twenties on concrete and finish carpentry crews across Orange County. He’s been around enough out-of-plumb rough-ins to know that a shower door hung square to a wall that isn’t square will bind, leak, or both.
We carry Mr-Glass factory replacement seals, hinges, and rollers for current model lines, and we keep quality aftermarket stainless hardware for older units where the original parts have been discontinued. We repair before we recommend replacement. If a Mr-Glass enclosure can be re-hung, re-sealed, and made watertight with new hardware, that’s what we’ll tell you, because in San Francisco the real variable is never the glass, it’s the wall behind it. One contractor, every system, no handoff gaps – and on a Mr-Glass job, that means one team accountable for templating, glass, hardware, and the tile and blocking that hold it all together.
Styles & brands we work with







Common Mr-Glass Construction Problems We Solve in San Francisco
- Doors that drag or gap because the wall moved. Frameless Mr-Glass pivot and hinge wear shows up fast in Victorian and Edwardian openings that were never plumb. The door isn’t the problem. The wall shifted, and the pivot is now carrying load it wasn’t designed for. We re-set blocking, re-template to the actual opening, and hang fresh hardware that runs square.
- Failed seals and caulk lines in damp, unventilated baths. San Francisco’s foggy marine air keeps bathrooms wet long after the shower stops. In older buildings with no mechanical exhaust, mildew works under the silicone and breaks the water seal. We strip the old sealant, treat the joint, and re-seal with a product that cures in cool, damp conditions, not just warm ones.
- Mineral spotting and hard-water etching on shower glass. Many pre-war San Francisco buildings still run original galvanized supply lines with no softener. The result is hard-water scale that etches Mr-Glass panels over time. We’ll tell you honestly whether the glass can be cleaned and sealed or whether the temper is compromised and the panel should be replaced.
- Corroded hinges and pitted hardware near the fog belt. West-facing bathrooms in the Sunset, the Richmond, and along the coastal edge eat plated hardware. Salt-laden air gets into the hinge pin, and the chrome starts to pit. We replace with stainless, which holds up far better in this climate.
- Bypass enclosures that stop tracking after foundation work. This is a San Francisco signature. When a soft-story retrofit gets signed off and the floors above settle, the top rail can rack, and Mr-Glass semi-frameless bypass panels bind. We re-hang the rail, re-set the rollers, and if the opening has moved too far, we re-template for a hinged door instead.
Mr-Glass Service in San Francisco: What Local Conditions Mean for Your Equipment
Here’s the piece most people don’t know until they live through it. San Francisco’s Soft-Story Retrofit Ordinance has pushed thousands of two- and three-unit Victorians and Edwardians through mandatory seismic strengthening in the last several years. That work is code-driven and non-negotiable for many buildings, and it involves re-pouring foundations and adding steel moment frames at the ground floor. When that work gets signed off, the floors above it move. We’ve templated bathrooms before a retrofit inspection passed, then come back to find the opening a half-inch out of level by the time the Mr-Glass panel arrived. In Visitacion Valley and Noe Valley, on downhill-side Edwardians, our crew has shown up after garage-level retrofits were signed off to find the upstairs hall bath’s Mr-Glass semi-frameless bypass enclosure no longer tracked. The header had racked, and the panels bound in the top rail. We re-set the wall blocking, re-templated to the new opening, and hung a frameless hinged door with fresh Mr-Glass pivots and seals, then hand-carried the old panels down the stairs because there’s no alley for a dumpster on that block. That’s the reality of Mr-Glass work in San Francisco: you’re not just hanging glass, you’re fitting it to a building that’s been moving for a hundred years and just moved again.
Mr-Glass Models & Products We Service in San Francisco
We install and repair the full current Mr-Glass lineup: frameless hinged shower doors in 3/8″ tempered glass, semi-frameless bypass sliding enclosures, mirrored shower and closet doors, and custom glass shelving with vanity mirror sets. We use Mr-Glass factory seals, hinges, and rollers whenever the model line still supports them. When a line’s been discontinued, we switch to quality aftermarket stainless hardware rather than forcing a replacement. On older enclosures, we’ll repair and re-seal before we ever suggest new glass, and we only recommend a full replacement when the panel or temper is genuinely compromised. We also handle full walk-in shower construction and tub-to-shower conversion, which means we can pull the old tub, re-frame, waterproof, tile, and hang the new Mr-Glass enclosure under one crew and one schedule, working as your General Contractor in San Francisco.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in San Francisco
Mr-Glass work in San Francisco prices out differently than in the East Bay or down the Peninsula because of access, prep, and the condition of the existing walls. A tub-to-shower conversion in a top-floor Victorian with no elevator means hand-carrying debris down three flights of stairs. That’s labor; there’s no way around it. Here are the ranges we quote for common Mr-Glass scopes in the city:
| Service | Typical San Francisco Range |
|---|---|
| Walk-In Shower Installation | $5,310 – $14,160 |
| Tub-to-Shower Conversion | $4,130 – $11,800 |
| Shower Replacement | $3,540 – $10,030 |
| Bathroom Vanity Installation | $945 – $3,540 |
| Bathroom Remodel | $10,620 – $33,040 |
Your free estimate includes a site visit, wall and opening measurements, and a written line-item quote with no change orders after work starts unless we uncover something structural. Call (833) 382-8544 and we’ll get you scheduled.
Serving San Francisco, CA — Our Local Coverage Area
We’re based in the San Francisco area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in San Francisco
Yes. If you templated before the retrofit was signed off, re-measure before you order glass. Foundation work moves the floors above it, and a half-inch of rack can mean a hinged door won’t close or a bypass rail won’t track. Call (833) 382-8544 and we’ll re-template to the actual opening for free as part of your estimate.
Wood-frame San Francisco buildings expand and contract with the wet winter and dry summer cycle. The building breathes, the opening shifts, and the door drags. It’s rarely the glass. We re-set the pivot and adjust the hinges so the door tracks through the full seasonal movement.
Yes, as long as we can get the glass into the room. Zero-lot-line buildings with steep stairs sometimes mean hand-carrying panels up and around tight turns, and we plan for that. We’ll measure the path before we order anything. Call (833) 382-8544 and we’ll walk the site first.
It does. Cool, damp air and salt-laden fog accelerate corrosion on plated hardware and keep sealant joints wet longer. We use stainless replacements where we can, and we choose sealants rated for damp, cool curing so they actually set in San Francisco conditions rather than staying tacky for weeks.
Usually the water. Older buildings with galvanized supply lines and no softener produce hard-water scale that etches the surface over time. We’ll test the panel and tell you whether it’s cleanable or whether the surface is permanently damaged. Call (833) 382-8544 for an assessment.
Service Areas Near San Francisco
We run Mr-Glass service across the city, with regular calls in Mr-Glass service in Chinatown, the Mission, Noe Valley, the Richmond, and the Sunset. We also take jobs across the water in Mr-Glass service in Tiburon and the surrounding North Bay. If you’re outside the city, our San Francisco service area page shows the full coverage map. For details on the full brand lineup, see our main Mr-Glass sales & service page.
Book Your Mr-Glass Service in San Francisco Today
Call (833) 382-8544 for a free, no-pressure estimate on any Mr-Glass repair, replacement, or full shower remodel in San Francisco. We’ll measure, quote it straight, and if it’s a small repair we can usually get it done the same week.
Written by Noel Carranza, Owner at Gold Star Contractors, serving San Francisco since the day we first re-hung a shower door on a wall that was older than the Golden Gate Bridge.