Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in San Bruno, CA | Gold Star Contractors
Gold Star Contractors provides independent Mr-Glass service in Millbrae and across San Bruno, specializing in frameless shower enclosures, semi-frameless sliding doors, and custom glass work for the city’s 1940s – 60s ranch homes and newer Crestmoor rebuilds. What makes our Mr-Glass work different here is simple: we know the 94066 housing stock well enough to spot an out-of-plumb opening before we ever template glass. Call (833) 382-8544 for a free estimate.
We’ve been installing and servicing Mr-Glass enclosures long enough to know that a shower door in San Bruno doesn’t behave like one in a drier city twenty miles inland. Our team handles everything from hinge adjustments and seal replacement to full frameless panel fabrication, and we stock the OEM and aftermarket parts that keep older enclosures operational. Learn more about our broader Mr-Glass sales & service capabilities, or keep reading to understand why San Bruno’s marine climate changes how glass work gets done.
Why San Bruno Residents Choose Us for Mr-Glass Service
Most contractors in San Bruno can hang a shower door. Few can tell you why a particular enclosure binds at the strike jamb in August but swings fine in January, or why one house on a Crestmoor block needs custom templating while the identical-looking home next door takes a stock panel. That’s the difference. We know Mr-Glass hardware, we know which parts are still available OEM and which have been discontinued long enough that a quality aftermarket seal is the only honest answer, and we know how this city’s fog belt moisture accelerates every failure mode a glass enclosure can have.
Noel Carranza, our owner and general contractor, spent years running multi-trade jobs where the glass is the last thing installed after plumbing, tile, and framing. That sequencing matters. By the time we template a Mr-Glass panel, we understand the whole room, not just the opening. One call, done right, that’s the only way we know how to run a job. If you’re in the San Bruno service area and your enclosure is fighting you, we’ll diagnose it honestly and tell you whether it’s a hinge job or a re-templating.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in San Bruno
- Stiff or sagging hinges on semi-frameless doors. San Bruno’s fog belt keeps bathroom seals damp and the room unheated for much of the day. That constant moisture load makes Mr-Glass pivots and hinges stiffen, sag, and eventually bind. We replace them with OEM hardware when the hole pattern is intact, and re-shim the panel so the door clears the strike side through the full swing.
- Mold and scale buildup along sliding door tracks. Clear vinyl seals and sweeps on Mr-Glass sliders collect hard-water scale, and in San Bruno’s marine humidity, black mold forms along the track much faster than any manufacturer’s maintenance schedule anticipates. We strip, deep-clean, and replace sweeps with aftermarket seals that hold up better to persistent moisture.
- Pitted and corroded aluminum trim on framed doors. Homes within the fog influence see aluminum framing chalk and pit far earlier than inland units. Screws loosened by seasonal expansion leave the door out of square. When the trim is pitted through, we’re honest about replacement rather than patching something that will fail again.
- Racked panels from never-plumb openings. A lot of San Bruno’s original post-WWII alcoves were framed fast and never corrected. The glass is fine, but the curb and tile surround shifted over decades, so the door binds or gaps at the strike side. We re-square the opening or order custom templated glass, whichever the actual address requires.
- Missing backing behind old tile. On a Crestmoor ranch that still had its original tub alcove, we pulled a semi-frameless Mr-Glass slider whose track was packed with scale and whose pivot hinges had corroded shut. Once the wall opened we found no blocking behind the old tile, so we added stud backing and re-squared the curb before templating a new frameless panel. The door now clears the strike jamb the whole swing.
Mr-Glass Service in San Bruno: What Local Conditions Mean for Your Equipment
San Bruno is a city of two housing stocks. The original 1940s – 60s ranches that dominate the flatlands and El Camino corridor were framed when a 60-inch tub alcove could be off by a half inch and nobody lost sleep over it. Then there’s the Crestmoor pocket, rebuilt after the 2010 PG&E pipeline explosion, where foundations, utility stubs, and bathroom framing are barely a decade old. The giveaway for anyone who works glass here: a Mr-Glass enclosure measured on one lot may sit in a bathroom framed last decade while the identical-looking house next door has a 1950s out-of-plumb alcove. We verify the actual opening on each address before ordering glass, because stock panels and stock decisions don’t mix in 94066.
That split stock is the single most checkable fact about San Bruno construction for any General Contractor in San Bruno. A contractor who doesn’t know which houses on a given Crestmoor block were rebuilt will template for a square opening that isn’t there, or worse, charge for custom work when a stock panel would have cleared. We check the actual framing, the actual curb level, and the actual wall condition before any glass gets ordered.
Mr-Glass Models & Products We Service in San Bruno
We service the full Mr-Glass product range that shows up in San Bruno bathrooms: frameless hinged shower enclosures in 3/8-inch and 1/2-inch glass, semi-frameless sliding shower doors, framed pivot shower doors with aluminum trim, and custom mirror and glass panel work tied to bath remodels. Our parts approach is straightforward: we use Mr-Glass OEM hinges, pivots, and sweeps where they’re still available so the hardware matches the original hole pattern, and we switch to quality aftermarket seals and rollers when an OEM part is discontinued. For most San Bruno enclosures, we keep common hardware in local stock for faster turnaround, and we’ll tell you up front if a panel has delaminated, pitted through, or racked beyond re-shimming. Some doors aren’t worth repairing, and we won’t sell you one that is.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in San Bruno
Pricing for Mr-Glass work in San Bruno depends on what the opening actually is, not what it was supposed to be. A stock panel in a clean, square rebuild is less expensive than custom templating in a 1950s alcove that shifted. A tub-to-shower conversion with new glass costs more than a straight enclosure swap because it involves plumbing, waterproofing, and framing, not just glass. A free estimate covers the actual measurements, a line-item quote, and an honest recommendation on repair versus replacement.
| Service | Price Range |
|---|---|
| Frameless shower enclosure installation (walk-in shower) | $4,500 – $12,000 |
| Tub-to-shower conversion with new glass | $3,500 – $10,000 |
| Shower replacement (enclosure/pan) | $3,000 – $8,500 |
| Small bathroom remodel | $5,000 – $12,000 |
| Bathroom vanity installation | $800 – $3,000 |
Those ranges reflect San Bruno’s real cost environment: tight lots, fog-belt prep work, and the occasional need for additional blocking or waterproofing once walls open. Call (833) 382-8544 for an exact quote. Estimates are free.
Serving San Bruno, CA — Our Local Coverage Area
We’re based in the San Bruno area and know this community well, and we also provide Mr-Glass repair in Pacifica. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in San Bruno
No, a direct enclosure swap in an existing shower opening doesn’t require a permit. However, if your project includes moving plumbing, changing the drain location, or altering framing, San Bruno’s building department generally requires permits for that scope. We pull permits when the job calls for it and schedule inspections so the work closes out clean. Call (833) 382-8544 if you’re unsure where your project falls.
It’s the moisture. San Bruno’s fog-belt summers keep the air damp and cool, which swells seals, softens the few wood components near the opening, and lets scale build up on the track. Winter’s drier, windier air often lets the same door slide easier. The fix is usually a deep track clean and a fresh seal set, not a new door. We can tell you which it is over the phone or by taking a quick look.
Yes. Mr-Glass service in Brisbane and nearby Crestmoor homes rebuilt after the 2010 pipeline explosion typically have much squarer openings than the original 1950s ranches nearby, but we still verify every dimension before ordering glass. Some rebuilt homes take stock panels; others were finished with non-standard alcove sizes that need custom templating. We measure the actual opening, not the neighborhood’s reputation.
If the aluminum trim has pitted through or the glass has delaminated from the frame, replacement is usually the honest answer. Surface chalk can sometimes be cleaned and sealed, but once corrosion works into the extrusion, the door’s structural integrity is gone. We’ll show you the condition and recommend replacement when repair won’t hold. Call (833) 382-8544 for a free assessment.
Yes, but it may need custom templating. Frameless panels have tighter tolerances than framed or semi-frameless doors, so an out-of-plumb opening that can absorb a 1/4-inch gap in a framed unit may need a custom-cut panel and careful shimming in a frameless configuration. In some cases, the better investment is re-squaring the curb and adding backing so the glass can be installed to spec. We’ll measure and give you both options with pricing. Call (833) 382-8544.
Service Areas Near San Bruno
In addition to San Bruno, our Mr-Glass service work extends to nearby Peninsula and San Mateo County communities. We regularly serve customers in Mr-Glass service in Montara along the coast, and Mr-Glass service in South San Francisco for its mix of postwar stock and newer infrastructure. If you’re on the Peninsula and wondering whether we cover your street, call us.
Book Your Mr-Glass Service in San Bruno Today
If your Mr-Glass enclosure is binding, leaking, or showing signs of fog-belt corrosion, don’t wait until the track fails completely. Call (833) 382-8544 today for a free estimate, and we’ll schedule a measurement visit at a time that works for you.
Written by Noel Carranza, Owner at Gold Star Contractors, serving San Bruno with independent Mr-Glass installation and repair.