Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Millbrae, CA | Gold Star Contractors
We provide independent Mr-Glass in Burlingame shower enclosure and glass installation, repair, and replacement across Millbrae, CA. We’re not a manufacturer-authorized dealer, and we don’t pretend to be. What we are is a local general contractor that has templated and fit Mr-Glass frameless pivots, semi-frameless sliders, and custom fixed panels into enough 1940s ranchers and fog-belt bathrooms to know exactly what fails here and why. Call (833) 382-8544 for a free estimate on any Mr-Glass project in Millbrae.
Why Millbrae Residents Choose Us for Mr-Glass Service
Mr-Glass makes a solid enclosure. But the hardware and seals on those enclosures take a beating in Millbrae that they rarely take ten miles south in San Mateo or with Hillsborough Mr-Glass service. Our owner, Noel Carranza, grew up watching older tract homes get renovated block by block in Anaheim, then spent his twenties on concrete and finish carpentry crews before building his own operation. He sees a shower enclosure the way a framer sees a wall: it either fits the opening it’s in, or it doesn’t. That matters in Millbrae, where hardly any bathroom is square anymore.
We also carry the repair-and-replace judgment most glass shops don’t. If the glass is sound and only the hinge or roller has failed, we swap the part and you keep your shower. We don’t push a new enclosure when a $90 seal set solves the problem. For more on how we approach Mr-Glass sales & service, that page walks through the philosophy.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Millbrae
- Corroded pivot hinges and pitted handles. The SFO fog belt pushes cool, salty onshore air over Millbrae nearly year round. We regularly pull Mr-Glass frameless pivot doors where the hinges look ten years older than the glass. Stainless replacement hardware stops the cycle.
- Mold growing behind sweeps and vinyl seals. Millbrae summers stay damp, and bathrooms in the 1940s and 1950s ranchers often lack the ventilation to ever fully dry. When a Mr-Glass sweep fails, mold moves into the channel behind it. We cut out the old seal, clean the track, and install a fresh OEM sweep before the glass etches.
- Doors binding after the floor joists swell. Pier-and-beam foundations under many Millbrae ranchers sit close to damp ground. When crawlspace moisture swells the joists, the opening racks and a frameless Mr-Glass door starts binding or gapping. Sometimes the fix is re-shimming. Sometimes it’s cutting and blocking the framing first.
- Water spotting and etch on glass from old galvanized supply lines. A lot of Millbrae plumbing is original galvanized. The rust and mineral content leave marks on Mr-Glass panels that standard cleaners won’t touch. We polish what’s polishable and tell you straight when the panel needs replacement.
- Dry-rot behind the shower wall itself. This is the one that surprises people. See the section below. The glass is rarely the first thing to fail when the framing behind it is soft.
Mr-Glass Service in Millbrae: What Local Conditions Mean for Your Equipment
Millbrae’s position as the first city south of SFO puts every exterior surface in the fog belt, but the problem goes deeper than surface corrosion. The 100-year-old eucalyptus windrows along Mills Canyon trap moisture, and south-facing walls, decks, and window frames on those lots stay damp enough to grow fungus and dry-rot that dry-side San Mateo contractors rarely see. When we’re called to install a Mr-Glass walk-in shower or a frameless enclosure as part of a bathroom remodel near Mills Estate, we don’t just template for the glass. We open the wall and check what’s actually behind the tile. Rotted blocking won’t hold a glass panel anchor, no matter how good the bracket is. We’ve cut out and replaced enough of it in Millbrae to know this is a local condition, not an occasional oddity.
That’s why our process here starts with the opening, not the enclosure. We square what can be squared, block what needs blocking, and only then do we template the Mr-Glass panels. In Millbrae, that order of operations is the difference between a door that closes clean for a decade and one that binds within two years.
Mr-Glass Models & Products We Service in Millbrae
We install and repair the full Mr-Glass residential shower lineup in Millbrae, including frameless pivot shower doors in 3/8″ tempered glass, semi-frameless sliding bypass doors, custom frameless fixed panels and return screens, and Mr-Glass mirror and shelving units. For hardware replacement, we use Mr-Glass OEM hinges, rollers, and seals wherever the part is still available, because the salt air here punishes cheap pot metal faster than most climates do. When an OEM part has been discontinued, we move to quality stainless aftermarket hardware and tell you upfront which one we’re using and why. We keep common Mr-Glass roller and seal sets in our local stock so most Millbrae service calls don’t wait on a manufacturer order.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Millbrae
Here’s where Millbrae homeowners usually start when they call us. These ranges cover typical bathroom glass and shower enclosure work in the city’s older and newer homes alike.
| Service | Typical Millbrae Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
What moves a Millbrae project toward the top of those ranges is usually the framing condition behind the shower. A clean 1980s bathroom goes quicker than a 1950s rancher with rotted blocking and galvanized stubs. Your free estimate includes a look at the opening, a written line-item quote, and a straight answer on what needs to happen before the glass goes in. Call (833) 382-8544 to schedule yours.
Serving Millbrae, CA — Our Local Coverage Area
We’re based in the Millbrae area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Millbrae
Yes, and it’s one of the most common Mr-Glass service calls we handle in Millbrae. The marine layer keeps bathroom humidity from escaping, and once a vinyl sweep separates from the glass, moisture sits in the channel and mold takes hold. The fix is usually a new OEM sweep, a deep track clean, and better bathroom ventilation. Call (833) 382-8544 and we’ll tell you whether you’re looking at a seal replacement or something deeper.
No. We’re an independent Millbrae contractor that installs and services Mr-Glass products. We’re not manufacturer-affiliated or authorized, which means our loyalty is to the job and the opening, not a quota. We use Mr-Glass OEM parts where they’re the best option and tell you when they aren’t.
Most hinge, roller, and sweep replacements are done in a single visit of one to two hours. Full custom enclosure installations typically run two to three days in Millbrae, depending on whether framing repair behind the shower is needed. You’ll get a schedule in writing before we start. For a timeline on your job, call (833) 382-8544.
We service and install Mr-Glass frameless pivot doors, semi-frameless sliding bypass doors, custom fixed panels and return screens, and mirror and shelving units. If you have an older Mr-Glass enclosure in a Millbrae rancher and aren’t sure of the model, we can identify it on site and source the right parts.
A hinge or roller replacement on a standard Mr-Glass enclosure in Millbrae starts around $200 – $600 including the part and labor, while a full shower enclosure replacement runs $3,000 – $8,500 depending on glass size and framing condition. A free estimate gives you the exact number. Call (833) 382-8544 to book one.
Service Areas Near Millbrae
Gold Star Contractors serves Millbrae and the surrounding Peninsula and broader Bay Area communities. If you’re just south of us, see our Mr-Glass service in San Bruno. If you’re over the hill or up the coast, we also cover Mr-Glass service in Moss Beach and nearby areas. For a full picture of our coverage, see the Millbrae service area page.
Book Your Mr-Glass Service in Millbrae Today
If your Mr-Glass enclosure is binding, dripping, or growing mold at the seals, call (833) 382-8544 for a free estimate. We’ll look at the glass, the hardware, and the framing behind it, then give you a written quote. One call, done right – that’s the only way we know how to run a job.
Written by Noel Carranza, Owner & General Contractor at Gold Star Contractors, serving Millbrae since he first started templating glass in fog-belt bathrooms and learning exactly what the marine layer does to hardware.