Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Temecula, CA | Gold Star Contractors
Gold Star Contractors provides independent Murrieta Hot Springs Mr-Glass service, glass panel, and flat-glass installation and repair across Temecula. We are not a Mr-Glass showroom and we’re not authorized or warranty-endorsed by the brand, but our crews install and service its frameless and semi-frameless systems here every week. What makes our Mr-Glass work different in Temecula is simple: we field-measure for the out-of-square bathroom openings common in Redhawk, Paloma del Sol, and Wolf Creek tract homes, because a stock kit rarely fits right the first time. Call (833) 382-8544 for a free estimate on any Mr-Glass enclosure, mirror, or patio glass project.

Why Temecula Residents Choose Us for Mr-Glass Service
Most glass companies in the Temecula area know how to hang a shower door. Fewer know the Mr-Glass hardware lines well enough to match an OEM hinge to a specific glass thickness or hole pattern, and that’s where our experience matters. We work with Mr-Glass frameless pivots, semi-frameless bypass systems, and fixed-panel enclosures often enough that the measurement tolerances and seal behaviors are second nature to us.
Noel Carranza, Owner and General Contractor at Gold Star Contractors, grew up in Anaheim’s Platinum Triangle, where he watched older tract homes get renovated block by block and learned how buildings actually go together. He studied construction technology at Fullerton College, then spent his twenties doing concrete and finish carpentry across Orange County before building his own operation. That background matters in Temecula, where the work is less about glass and more about getting glass to fit a 1995 bathroom that was never perfectly square. One call, done right – that’s the only way we know how to run a job.
We’re a full-scope contracting team, which means when a Mr-Glass enclosure is part of a larger bathroom remodel, the tile, drywall, plumbing, and glass all fall under one accountable crew. No handoff gaps. No “the glass guy says it’s the tile guy’s problem.” Just one contractor managing the whole opening.
Styles & brands we work with







Common Mr-Glass Construction Problems We Solve in Temecula
- Hard-water etching on frameless low-iron glass. Temecula’s tap water carries a heavy mineral load, and on south- and west-facing showers, the summer sun bakes those minerals into the glass surface. We remove what can be polished and tell you plainly when a panel is etched past saving.
- Shrinking urethane and silicone seals from thermal cycling. Hot days followed by cool nights plus dry Santa Ana spells make seals lose flexibility faster here than in coastal cities. The result is pivot-door leaks that run down the tile and into the drywall before anyone notices.
- Seized rollers and corroded pivot hardware in bypass tracks. Bathroom humidity plus valley dust collect in the bottom tracks of semi-frameless bypass systems. Rollers bind, doors jump the track, and homeowners end up lifting the panel instead of sliding it.
- Chips and misaligned swings from out-of-square openings. The 1990s and 2000s tract bathrooms we see across Temecula were framed quickly, and the shower openings often run a quarter- to half-inch out of plumb. That stresses Mr-Glass glass-to-wall gaps and leads to chipped edges on the strike side.
- Discontinued hardware on older Mr-Glass enclosures. When an original pivot set or roller assembly is no longer in production, we source quality aftermarket parts that match the glass thickness and hole pattern rather than forcing an OEM part that doesn’t exist.
Mr-Glass Service in Temecula: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic Mr-Glass page: because most Temecula bathrooms sit in 20-to-35-year-old tract homes in Redhawk, Paloma del Sol, and Wolf Creek, the shower openings are often slightly out of plumb and the original tile surrounds are still in place. That means a Mr-Glass enclosure in this city usually needs custom field-measured glass rather than a stock kit. In a Paloma del Sol home off Avenida de las Flores, the original semi-frameless bypass in the hall bath had seized rollers and a mineral-etched panel that no longer slid cleanly. We pulled the doors, cleaned and re-squared the tile opening, and installed a custom-measured Mr-Glass frameless fixed-panel with a pivot door and OEM hinges and seals. The owner got a leak-free shower that clears the HOA-neutral look of the rest of the house. That’s the Temecula-specific repair path: measure the actual opening, correct what’s correctable, and cut to fit what isn’t.
The same logic applies to Mr-Glass sales & service work across our full coverage area. If the opening isn’t square, no factory-sized kit will ever hang right.
Mr-Glass Models & Products We Service in Temecula
Our crews work on Mr-Glass repair in Murrieta, frameless fixed-panel and pivot shower door enclosures, semi-frameless sliding bypass shower doors, custom-cut mirrors and glass table tops, and tempered glass railing and patio or window glass. For repairs, we use Mr-Glass-spec OEM hardware and seals wherever they’re available, so pivots, hinges, and channels match the original glass thickness and hole pattern. When OEM parts are discontinued, we source quality aftermarket seals and rollers that fit the glass correctly. We keep common seal profiles and roller sizes stocked for faster turnaround on Temecula jobs, and our installers carry field-measuring tools calibrated to the two-millimeter tolerances Mr-Glass enclosures require. When glass is chipped or etched past polishing, or a frame has pulled out of square, we recommend replacement over repair and say so directly.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Temecula
What you’ll pay depends on the enclosure type, glass thickness, hardware finish, and how much opening correction the tile work requires. Here are the ranges we work within for Temecula Mr-Glass and shower work:
| Service | Typical Temecula Range |
|---|---|
| Frameless Glass Shower Enclosure | $4,500 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Every estimate is a free, written, line-item quote. We don’t pad the number hoping you won’t ask, and if we see a panel that just needs a seal replacement instead of a full enclosure swap, we’ll tell you that. Call (833) 382-8544 for an exact quote.
Serving Temecula, CA — Our Local Coverage Area
We’re based in the Temecula area and know this community well, with Mr-Glass repair in Wildomar also available. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Temecula
Yes, with field measuring and custom-cut glass. We measure the actual opening, note where it runs out of plumb, and either correct the tile or cut the panel to follow the opening so the hinges seat cleanly. Stock kits almost never hang right in these tract bathrooms. Call (833) 382-8544 and we’ll measure yours.
Mineral deposits etch the glass surface over time, especially on windows facing south and west where the sun bakes the water spots in. Seals also harden faster with the mineral load. Routine squeegee use helps, and we can recommend a post-installation glass treatment that slows the buildup. Call (833) 382-8544 if you’re already seeing white haze you can’t scrub off.
Interior shower glass replacement doesn’t require HOA review in Temecula. Exterior-facing glass, like patio enclosures, railings, or window replacement glass, usually does need architectural committee approval in those communities. We can help you flag what needs paperwork before you start. Call (833) 382-8544 and we’ll walk through your specific project.
Often yes. If the frame is square and the fixed panels are in good shape, we can replace a single pivot door, a roller assembly, or a side panel and match the glass tone and hardware finish to the rest. When the enclosure is original to your 1990s bathroom and hardware is discontinued, we’ll give you a straight answer on whether a partial replacement is worth it. Call (833) 382-8544 for a look.
A walk-in shower install means building or converting a curbless or low-curb shower from scratch, including waterproofing, tile, glass, and plumbing fixtures. A shower replacement means pulling an existing enclosure and swapping in a new one within the same footprint. Walk-in installs run $4,500 – $12,000, while replacements typically run $3,000 – $8,500, depending on glass and tile scope. Call (833) 382-8544 for a free estimate on either.
Service Areas Near Temecula
Beyond Temecula service area ZIP codes 92590, 92591, 92592, and 92593, we take Mr-Glass work in nearby communities across the Inland Valley. Our crews also serve Mr-Glass service in Oak Hills to the north and Mr-Glass service in Phelan up in the high desert. For closer-in jobs, we cover Corona, Norco, Eastvale, and Jurupa Valley.
Book Your Mr-Glass Service in Temecula Today
We provide independent Mr-Glass installation and repair across Temecula and Mr-Glass in Rainbow, and our calendar is set up for fast scheduling on standard enclosure work. Call (833) 382-8544 for a free estimate, or tell us what’s leaking, etched, or stained and we’ll tell you what it’ll take.
Written by Noel Carranza, Owner & General Contractor at Gold Star Contractors, serving Temecula and the surrounding Inland Valley