Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Romoland, CA | Gold Star Contractors
We provide independent CGI cabinet and countertop installation, refacing, and full kitchen remodeling across Romoland, CA, and the surrounding 92585 ZIP, plus Sun City CGI service nearby. The thing that separates our CGI work here from anywhere else is what’s under your floor: Romoland sits on former dairy and agricultural land, and we routinely correct slab dips and out-of-level conditions before a single cabinet box gets set. That’s the difference between a countertop that seams tight and one that opens up six months later. Call (833) 382-8544 for a free estimate.
Our crews have years of hands-on experience with CGI sales & service across the Inland Empire, from ready-to-assemble box lines to semi-custom kitchen programs with plywood upgrades. We’re an independent CGI service provider, not a dealer or authorized agent. That independence means we give you straight answers on repair versus replacement, and we source OEM parts when they’re available, quality aftermarket hardware when they’re not.
Why Romoland Residents Choose Us for CGI Service
CGI cabinets are honest, serviceable product lines: RTA shaker and flat-slab boxes, semi-custom door styles, quartz and granite countertop programs, bath vanities and linen cabinets. Like any cabinet line, they live or die on two things: how they’re installed and what they’re installed on, whether that’s here or with CGI in Good Hope. In Romoland, the “what they’re installed on” part is where most contractors fall short.
Noel Carranza, our owner and general contractor, spent his twenties doing concrete work, framing, and finish carpentry before building Gold Star Contractors. He studied construction technology at Fullerton College and has spent years watching how buildings actually behave in Riverside County heat. That background matters when your CGI cabinet run sits on a slab that used to be a dairy feed lot. We check the floor first. Most crews don’t. Then we install the cabinets. That sequence is the whole job.
We’re Romoland service area regulars, which means we’ve already dealt with the county permit path, the converted dairy land quirks, and the older ranch homes that make up so much of this area’s housing stock. You don’t have to explain your house to us. We’ve been in it before.
Styles & brands we work with
Common CGI Construction Problems We Solve in Romoland
- Thermofoil and laminate door skins peeling at the edges. CGI’s wrapped doors hold up fine in mild climates, but inland Riverside County swings from cool mornings to 100°F-plus afternoons. West- and south-facing walls in Romoland ranch homes bake all day, and the glue line on thermofoil edges eventually fails. We re-skin or replace affected doors before the peeling spreads past the point of repair.
- Particleboard and MDF box swelling against moisture-wicking slabs. Older rural Romoland homes often sit on original farm-era slabs with no vapor barrier. Cabinets set directly against those floors wick moisture at the toe kick, and the boxes swell and delaminate from the bottom up. We pull, inspect, and reinstall on shimmed, sealed bases if the box is sound. If it’s delaminated, we replace it rather than patch it.
- Drawer glides and hinges stripped out of particleboard screw holes. CGI’s economy hardware is durable enough for normal use, but kitchens serving large multi-generational households – common in Romoland – put years of heavy use on those screw holes fast. We repair stripped holes with insert systems, or upgrade to aftermarket soft-close hardware that outlasts the original spec.
- Countertop seams and edge laminations opening up on racked cabinet runs. When cabinets are set on an uneven Romoland slab, the boxes twist. The countertop seam takes the stress. We level and square the cabinet run before templating any top, so the seam closes once and stays closed.
- Full kitchen layouts fighting out-of-level floors from old fill soils. Converted dairy land around Romoland often hides old manure pads and buried irrigation lines under the topsoil. A slab that looks flat from a standing height can be out by two inches across a ten-foot run. We correct at the floor, not with shims stacked under every corner.
CGI Service in Romoland: What Local Conditions Mean for Your Equipment
Here’s the thing about Romoland that a generic CGI page won’t tell you: this area was dairy and agricultural land for generations before the tract subdivisions started rolling through. When we excavate for a kitchen remodel on a converted parcel, we regularly hit old manure pads, buried irrigation pipe, and variable fill soil. On a job off Ethanac Road in the 92585 ZIP, we pulled out a failing CGI thermofoil cabinet run in a 1970s ranch kitchen and found the slab had a two-inch dip where an old manure pad had settled. The previous installer had shimmed the cabinets to the floor as it sat. The doors never closed right after year one. We ground and self-leveled the floor, reset the new CGI shaker boxes on a shimmed base, and templated a CGI quartz top off the corrected walls. The doors close clean now, and the seam sits tight. That’s the information gain: floor correction first, everything else second. Most installers in this area don’t do it because it takes an extra day and it doesn’t show up in photos. It shows up in your cabinets five years later.
CGI Models & Products We Service in Romoland
We work across the full CGI product range: Ready-to-Assemble cabinetry with shaker and flat-slab door styles, semi-custom kitchen cabinet lines with plywood box upgrades, quartz and granite countertop programs, and bath vanity and linen cabinet collections. For repairs, we use CGI OEM hardware, hinges, and door or drawer parts whenever the line is still supported. If OEM parts are discontinued or back-ordered, we switch to quality aftermarket glides, hinges, and shelf pins that meet or beat the original spec. Our independent stance means we always give you the honest call: re-facing or re-topping a sound CGI box is often the right move, but swollen or delaminated boxes get replaced rather than patched.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Romoland
Here are the line-item ranges we typically quote for CGI work in Romoland. Every project starts with a free on-site estimate and a written line-item quote, so the numbers below are a starting point, not a guess.
| Service | Typical Romoland Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
What drives your final number in Romoland is the floor correction work, the cabinet line you choose, and whether you’re re-facing an existing box or replacing it. On older ranch homes, expect some slab prep line item. On newer tract homes, the floor is usually closer to true but still worth checking. Call (833) 382-8544 for an exact quote – the estimate is free, and we’ll walk the site before we talk numbers.
Serving Romoland, CA — Our Local Coverage Area
We’re based in the Romoland area and know this community well, and we also handle CGI in Quail Valley. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Romoland
Most likely yes. Romoland is unincorporated Riverside County, which means your permit goes through the county building department, not a city hall. For a cabinet replacement with no structural or plumbing changes, a permit may not be required, but any electrical, plumbing, or wall reconfiguration typically triggers a county permit. Gold Star Contractors handles the permit application, county inspections, and corrections as part of our scope. Call (833) 382-8544 and we’ll tell you exactly what your specific job needs before anything gets opened up.
Riverside County heat cycles are the main culprit. CGI thermofoil and laminate door skins expand and contract daily, and the glue line at the edge eventually separates, especially on west- and south-facing walls in ranch homes that catch afternoon sun. The old dairy-land slab moisture doesn’t help either. Re-skinning is usually cheaper than full door replacement if the core is still sound. We’ll tell you which one applies to your doors. Call (833) 382-8544 for an assessment.
Yes, but not the way most installers do it. We correct the floor first – grinding high spots, self-leveling low dips – and then shim and square the cabinet run to the corrected floor. After that, we template the countertop off the corrected walls and cabinet tops. On dairy-land parcels, that floor correction step is the difference between a seam that stays tight and a seam that opens. It’s built into our quotes. Call (833) 382-8544 to schedule a floor check.
A reface – new doors, drawer fronts, end panels, and hardware on a sound CGI box – typically runs three to five working days in Romoland. A full replacement, including demo, floor correction, new box install, countertop template and fabrication, and finish work, runs two to four weeks depending on the countertop material lead time. Quartz and granite tops add fabrication window, but we manage the sequence so you’re never sitting without a kitchen any longer than necessary. Call (833) 382-8544 for a timeline specific to your project.
Both, and we’re transparent about which. If the CGI cabinet line is still supported and OEM hardware is available at a reasonable lead time, we use it. If OEM parts are discontinued or back-ordered for months, we switch to aftermarket hinges, glides, and shelf pins that match or beat the original spec. We never quietly substitute without telling you first. Call (833) 382-8544 and we’ll tell you what your specific repair needs before we order anything.
Service Areas Near Romoland
We serve Romoland and the surrounding communities, including CGI service in Nuevo, Menifee, Perris, Hemet, and parts of the I-215 corridor. If you’re in CGI service in Buena Park or further west, we can help there too. Same crew, same standards, same floor-first approach.
Book Your CGI Service in Romoland Today
One call, done right – that’s the only way we know how to run a job. If your CGI cabinets need repair, refacing, or replacement in Romoland, or you need CGI repair in Perris, call (833) 382-8544. We’ll walk the site, check the floor, and give you a written quote before anything gets ordered.
Written by Noel Carranza, Owner & General Contractor at Gold Star Contractors, serving Romoland and the Inland Empire.