Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Construction in San Martin, CA | Gold Star Contractors
We provide independent Delta service across San Martin, from Delta sales & service to cartridge swaps and full bath remodels around Delta fixtures. The one thing that makes our Delta work here different: we’re not a corporate shop doing generic repairs, we’re a full-scope general contractor that understands how Delta valves, trim, and the plumbing around them hold up on private wells under Santa Clara County permitting. If you’re in the 95046 and your Delta shower is swinging hot and cold, call (833) 382-8544 for a straight answer and a free estimate.
Why San Martin Residents Choose Us for Delta Service
Most Delta problems aren’t actually Delta problems. They’re water problems, pressure problems, and rough-in problems that show up at the fixture. San Martin’s well-served homes put a lot of mineral load through Delta cartridges and aerators, and we see how that plays out week after week. Noel Carranza, our owner and General Contractor in San Martin, grew up watching older tract homes get rebuilt block by block in Anaheim, and spent his twenties on concrete work and finish carpentry before building this operation. That background matters when a simple cartridge swap turns into a valve body replacement inside a tiled wall. We quote repairs honestly instead of defaulting to a full fixture swap. We carry genuine Delta OEM cartridges, spools, and trim adapters for anything pressure-balance or under warranty, and we don’t make you wait on parts that should already be on the truck.
Styles & brands we work with
Common Delta Construction Problems We Solve in San Martin
- Reduced flow and stiff handle travel from well-water scale. Delta 600/700 series cartridges clog fast on untreated well water. We pull the cartridge, clean or replace it, and tell you whether the real fix is a softener or filter ahead of the fixture.
- Temperature swings when the well pump cycles. Original Monitor 1300/1400 pressure-balance valves in 1980s ranch homes lose their balancing spool over time. One more fixture running, and the shower goes cold. We rebuild or replace the valve body.
- Pitted chrome and dull trim on garage-shop baths. Summer dust from graded rural lots settles on escutcheons and SpotShield finishes. If the trim’s pitted but the valve is sound, we swap trim only.
- Corroded supply lines at the rough-in. Pre-1980 homes with galvanized or early copper lines on hard water develop corrosion right where the Delta valve threads in. A new cartridge won’t fix a rusted stub.
- Valve bodies past saving. If the rough-in valve is scaled or cracked, we say so plainly. We repipe and set a new pressure-balance unit rather than selling a cartridge that won’t work.
Delta Service in San Martin: What Local Conditions Mean for Your Equipment
Here’s the piece most Delta service pages miss. San Martin is unincorporated, which means a bathroom remodel that moves a Delta valve or adds a shower gets permitted and inspected through Santa Clara County, not a city building department like Morgan Hill or Gilroy. On acre-plus parcels, the county frequently ties that permit to septic clearance and well-setback review before plumbing rough-in can be signed off. We’ve done this enough to plan for it from the first estimate, whether it’s Delta in Corralitos or anywhere in the county. On a former vineyard parcel off Llagas Road, we opened a tiled wall to fix a Delta Monitor 1400 valve that had been swinging hot and cold for months. The balancing spool was seized with well-water scale, and a rusted galvanized stub was feeding the valve. We repiped the shower stub in copper, replaced the rough-in valve body with a new pressure-balance unit, and set fresh Delta trim before the county inspector cleared the rough-in and we closed the wall. That’s the difference between a service call and a remodel that passes inspection.
Delta Models & Products We Service in San Martin
We work on Delta Monitor 1300/1400 series pressure-balance shower valves, Delta Classic single-handle kitchen and bath faucets, builder-grade Tract-Pack tub/shower trim with 600/700 series cartridges, and the Foundations and Windemere faucet collections. For anything pressure-balance or under warranty, we use genuine Delta OEM parts. For non-critical trim, we stock quality aftermarket where it makes sense. We also handle the construction side around the fixture: tub-to-shower conversions, walk-in shower installation, vanity installation, and full bath remodels. That means one crew opens the wall, fixes the valve, and closes it back clean.
See the difference
Before
After
Before
After
Before
AfterDelta Service Pricing in San Martin
Delta service in San Martin covers a wide range because the job can be a $400 trim repair or a full bath remodel. What drives the cost: whether the rough-in valve needs replacement, whether we’re moving plumbing for a new shower layout, and whether the county permit process adds septic or well review. A free estimate includes a written line-item scope so you see the difference between a cartridge swap and a valve body replacement before any work starts.
| Service | Price Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Call (833) 382-8544 for an exact quote. Estimates are free, and we’ll tell you straight if a repair beats a replacement.
Serving San Martin, CA — Our Local Coverage Area
We’re based in the San Martin area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Delta Construction in San Martin
No. We’re an independent Delta service provider, not authorized or endorsed by Delta. We use genuine Delta OEM parts for pressure-balance and warranty work because that’s the right call, but the warranty and authorization sit with Delta, not us.
Genuine Delta OEM cartridges, spools, and trim adapters for anything pressure-balance or under warranty. Aftermarket only on non-critical trim where it works and you approve it. If the valve body is scaled or cracked, we don’t band-aid it, we replace the rough-in.
Most cartridge and trim repairs take a single visit, same day in most cases. If we’re moving a valve or adding a shower, Santa Clara County permitting and inspection timing sets the schedule. Call (833) 382-8544 and we’ll give you a realistic timeline for your specific project.
Monitor 1300/1400 series pressure-balance shower valves, Classic single-handle kitchen and bath faucets, Tract-Pack builder-grade tub/shower trim with 600/700 series cartridges, and Foundations and Windemere collections. If you’re not sure what’s behind the wall, we’ll identify it when we open it up.
A cartridge or trim repair typically falls in the $400 – $1,800 range. If the valve body needs replacement inside a tiled wall, that’s a shower replacement job running $3,000 – $8,500 depending on tile work and framing. The estimate is free, and it’ll show exactly what you’re paying for. Call (833) 382-8544 for a written quote.
Service Areas Near San Martin
Our Delta service work takes us all over the southern Santa Clara Valley. Beyond San Martin, we regularly serve San Martin service area neighbors in Morgan Hill, Gilroy, and the surrounding unincorporated pockets, plus Delta service in Amesti and Delta service in Aptos Hills-Larkin Valley for homeowners on similar well-and-septic lots. Wherever the fixture sits, same approach: find the real problem, price it straight, fix it once.
Book Your Delta Service in San Martin Today
If your Delta shower is swinging hot and cold, or you’re planning a bath remodel around existing fixtures, call (833) 382-8544. We’ll schedule a free estimate, identify the issue, and give you a written scope for the repair or remodel. One call, done right.
Written by Noel Carranza, Owner at Gold Star Contractors, serving San Martin and the southern Santa Clara Valley.